journal article·2015-12

Formation of carbon composite coatings by plasma spraying

Liutauras Marcinauskas, Žydrūnas Kavaliauskas, Romualdas Kėželis

Vacuum· Volume 122
Publisher page

Abstract

Abstract Carbon–silicon–sulfur composite coatings were deposited on stainless steel by atmospheric plasma spraying. The effect of spraying power on the coating microstructure and microhardness was investigated. The surface morphology and elemental composition of as-sprayed coatings were examined by scanning electron microscopy and energy dispersive X-ray spectroscopy. The increase of torch power leads to a lower oxidation degree and reduces the silicon concentration in the coatings. The SEM cross-section measurements indicated that the thicknesses of the coatings were in the range of 10–15 μm. The X-ray diffraction measurements indicated an increase of crystalline graphite phase with the increase of power. The results indicated that the coating roughness decreased, while the microhardness and specific surface area increased with increased power. The highest microhardness value of 314 HV was obtained.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Carbon properties and their role in super capacitors10.1016/j.jpowsour.2006.02.065 ↗
2. Microstructure and mechanical properties of MgO–C refractories containing graphite oxide nanosheets (GONs)10.1016/j.ceramint.2012.09.080 ↗
3. Preparation and tribological properties of self-lubricating TiO2/graphite composite coating on Ti6Al4V alloy10.1016/j.apsusc.2012.05.051 ↗
4. Sulfur-doped porous carbons: synthesis and applications10.1016/j.carbon.2013.11.004 ↗
5. Recent progress in doped carbon nanomaterials as effective cathode catalysts for fuel cell oxygen reduction reaction10.1016/j.jpowsour.2013.02.057 ↗
6. Preparation of lamellar carbon matrix for sulfur as cathode material of lithium-sulfur batteries10.1016/j.electacta.2014.07.080 ↗
7. Influence of high velocity oxygen-fuel spraying parameters on the wear resistance of Al–SiC composite coatings deposited on ZE41A magnesium alloy10.1016/j.matdes.2012.06.062 ↗
8. Thermal conductivity of plasma-sprayed W/SiC composite for high-temperature energy applications10.1016/j.surfcoat.2007.07.027 ↗
9. Adhesion, hardness and structure of thermal sprayed Al/SiC composite coat on graphite10.1016/j.surfcoat.2009.03.013 ↗
10. Fabrication and characterization of heat and plasma treated SiC/Al2O3–YSZ feedstocks used for plasma spraying10.1016/j.vacuum.2012.03.027 ↗
11. Dry sliding wear behavior of SiC reinforced titania coating deposited by high velocity oxy fuel spraying10.1016/j.mspro.2014.07.311 ↗
12. Structural and oxidation behavior of atmospheric heat treated plasma sprayed WC–Co coatings10.1016/j.vacuum.2013.01.019 ↗
13. Silicon carbide based plasma sprayed coatings10.1016/j.surfcoat.2012.06.062 ↗
14. Understanding plasma spraying10.1088/0022-3727/37/9/R02 ↗
15. Effect of temperature and Ar flow rate on Ti3SiC2 formation from TiSiO4 powders coated with pyrolytic carbon10.1016/j.ijrmhm.2013.11.002 ↗
16. Effect of alumina addition on the microstructure of plasma sprayed YSZ10.1016/j.jeurceramsoc.2005.03.027 ↗
17. Influence of powder size on characteristics of air plasma sprayed silicon coatings10.1016/j.ceramint.2012.03.080 ↗
18. Effect of spraying power on microstructure and bonding strength of MoSi2-based coatings prepared by supersonic plasma spraying10.1016/j.apsusc.2011.01.043 ↗
19. Effect of spraying power on microstructure and properties of supersonic plasma sprayed Al2O3 coating on porous Si3N4 substrate10.1016/j.jallcom.2012.12.097 ↗
20. The effect of plasma torch power on the microstructure and phase composition of alumina coatings
21. Microstructure and tribological properties of iron-based metallic glass coatings prepared by atmospheric plasma spraying10.1016/j.vacuum.2014.04.021 ↗
22. Effect of gun current on the microstructure and crystallinity of plasma sprayed hydroxyapatite coatings10.1016/j.apsusc.2007.02.183 ↗
23. Microstructure and hardness properties of cermet coating sprayed by low power plasma10.1016/j.matlet.2005.10.073 ↗
24. Study of titanium nitride deposition by supersonic plasma spraying10.1016/j.vacuum.2008.03.088 ↗
25. Effects of spray parameters on the microstructure and property of Al2O3 coatings sprayed by a low power plasma torch with a novel hollow cathode10.1016/j.tsf.2003.11.166 ↗
26. Structural and surface analysis of plasma processed zirconia coatings
27. High velocity plasma torch design and its flow parameters for ceramics thin film deposition
28. Effect of outlet nozzle design on the YSZ particle in-flight characteristics in plasma jet generated by DC plasma torch
29. Electrical and thermal characteristics of the linear, sectional dc plasma generator10.1088/0963-0252/13/2/002 ↗
30. Determination of elastoplastic properties by instrumented sharp indentation10.1016/S1359-6462(99)00011-1 ↗
31. Influence of the size of spraying powders on the microstructure and corrosion resistance of Fe-based amorphous coating10.1016/j.electacta.2011.05.020 ↗
32. Plasma sprayed TiO2: the influence of power of an electric supply on particle parameters in the flight and character of sprayed coating10.1016/j.jeurceramsoc.2010.05.029 ↗
33. Effect of critical plasma spray parameter on properties of hollow cathode plasma sprayed alumina coatings10.1016/j.surfcoat.2008.08.030 ↗
34. Graphite and graphene oxide electrodes for lithium ion batteries10.1016/j.colsurfa.2013.06.018 ↗
35. Correlation between the microstructures of graphite oxides and their catalytic behaviors in air oxidation of benzyl alcohol10.1016/j.jcis.2014.01.031 ↗
36. Pyrolytic carbon from graphite oxide as a negative electrode of sodium-ion battery10.1016/j.jpowsour.2014.04.038 ↗
37. Synthesis of silicon carbide whiskers using reactive graphite as template10.1016/j.ceramint.2013.07.032 ↗