Coupled effects of deposition and annealing temperatures on optical, electrical and mechanical properties of titanium oxide thin films
Source abstract
Abstract
Abstract In this study the influence of deposition temperature and a post-deposition annealing process on the optical, electrical, mechanical, and tribological properties of titanium oxide thin films was investigated. Based on high-resolution XPS, it was observed that the films became more metallic as the deposition temperature was raised from 15 to 450 °C. Moreover, the mechanical and tribological properties of the film deposited at 450 °C were at least 50% greater than for the film deposited at 15 °C. After annealing at 450 °C for 30 min in air, the films all became transparent and insulating. However, the annealing process had mixed effects on the mechanical and tribological properties such that the 15 and 250 °C films softened, but the 450 °C film hardened. This mixed trend is attributed to the different as-deposited film stoichiometries. The results show that the coupled effects of deposition temperature and post-deposition annealing are quite complex and that the mechanical properties of TiO2 thin films can be controlled independently of their optical and electrical properties. This is important because TiO2 coatings are often used as the outer-most layers in optical devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Metal and Thin Film Mechanics · Ga2O3 and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Titanium-dioxide antireflection coating for silicon solar-cells by spray deposition
2. Photoinduced reactivity of titanium dioxide10.1016/j.progsolidstchem.2004.08.001 ↗
3. Mechanisms of charge transport in an isotype n-TiO2/p-CdTe hetero junctions10.1134/S1063782611080045 ↗
4. A low-cost, high-efficiency solar-cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
5. A transparent metal: Nb-doped anatase TiO210.1063/1.1949728 ↗
6. Fabrication of TiO2-based transparent conducting oxide on glass and polyimide substrates10.1016/j.tsf.2008.11.090 ↗
7. Visible-light photocatalysis in nitrogen-doped titanium oxides10.1126/science.1061051 ↗
8. Titanium-dioxide photocatalysts produced by reactive magnetron sputtering10.1063/1.113956 ↗
9. Structural and mechanical properties of nanostructured TiO2 thin films deposited by RF sputtering10.1016/j.surfcoat.2010.06.058 ↗
10. Potential cost reduction of buried-contact solar cells through the use of titanium dioxide thin films10.1016/S0038-092X(03)00246-9 ↗
11. Influence of deposition parameters on the optical and structural properties of TiO2 films produced by reactive dc plasmatron sputtering10.1016/0040-6090(81)90673-8 ↗
12. Effect of total and oxygen partial pressures on structure of photocatalytic TiO2 films sputtered on unheated substrate10.1016/S0257-8972(01)01553-5 ↗
13. Nucleation and growth in TiO2 films prepared by sputtering and evaporation10.1016/0040-6090(94)90843-5 ↗
14. DC reactive magnetron sputtering of titanium-structural and optical characterization of TiO2 films10.1063/1.351264 ↗
15. Effect of substrate temperature on structural, morphological and optical properties of crystalline titanium dioxide films prepared by DC reactive magnetron sputtering10.1007/s10854-012-0681-1 ↗
16. Design, formation and characterization of a novel multifunctional window with VO2 and TiO2 coatings10.1007/s00339-002-1460-2 ↗
17. Some properties of TiO2 layers prepared by medium frequency reactive sputtering10.1016/S0257-8972(98)00751-8 ↗
18. High rate deposition of insulating TiO2 and conducting ITO films for optical and display applications10.1016/S0040-6090(03)01153-2 ↗
19. Structure and properties of crystalline titanium oxide layers deposited by reactive pulse magnetron sputtering10.1016/j.surfcoat.2003.10.115 ↗
20. Characteristics of graded TiO2 and TiO2/ITO films prepared by twin DC magnetron sputtering technique10.1016/j.surfcoat.2005.09.031 ↗
21. Nanoindentation of TiO2 thin films with different microstructures10.1088/0022-3727/42/14/145305 ↗
22. Mechanical properties of nanophase TiO2 as determined by nanoindentation10.1557/JMR.1990.1073 ↗
23. Influence of grain size on transition temperature of thermochromic VO210.1063/1.4906122 ↗
24. Optical properties of super stoichiometric TiN1+x thin films10.1016/j.tsf.2012.10.016 ↗
25. Pressure and temperature effects on stoichiometry and microstructure of nitrogen-rich TiN thin films synthesized via reactive magnetron DC-sputtering10.1155/2008/267161 ↗
26. Influence of Na diffusion on thermochromism of vanadium oxide films and suppression through mixed-alkali effect10.1016/j.mseb.2015.06.006 ↗
27. Microstructure, oxidation resistance, mechanical and tribological properties of Mo–Al–N films by reactive magnetron sputtering10.1016/j.vacuum.2013.11.013 ↗
28. Alteration of Ti 2p XPS spectrum for titanium oxide by low-energy Ar ion bombardment10.1002/sia.1296 ↗
29. Structural and thermal parameters for rutile and anatase10.1107/S010876819100335X ↗
30. 2012
31. Rosencher · 2002
32. An improved technique for determining hardness and elastic-modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗