journal article·2020-12

Atomistic simulations of interfacial deformation and bonding mechanism of Pd-Cu composite metal membrane using cold gas dynamic spray process

Sunday Temitope Oyinbo, Tien-Chien Jen, Yudan Zhu, Joseph Sehinde Ajiboye, Sikiru Oluwarotimi Ismail

Vacuum· Volume 182
Publisher page

Abstract

Abstract The creation of atomic structures and the study of the deformation processes through molecular dynamics simulations have shown many advantages. However, gaps associated with the development and evolution of microstructure in the coating zone and dynamic processes that take place during cold gas dynamic sprayed materials still exist. The focus of this study was to investigate the interfacial deformation behaviours and the mechanism of bonding between atoms of palladium (Pd) and copper (Cu) composite metal membrane (CMM) using molecular dynamic simulations. The results confirmed that asymmetric deformation occurred during cold gas dynamic spray at the Pd-Cu interfacial region. As the impact time increases, the layer thickness at the interface also increases. The concentrations of Pd-Cu CMM at the interfacial zone showed the presence of phase transitions at relatively long impact time. Furthermore, CGDS deformation was found to be an unsteady and dynamic process. Explicit bond analysis in this study also has shown that breaking of atomic bonds is not the key mechanism for the initial Pd-Cu plastic deformation occurrence. The higher interfacial bonding energy and interfacial shearing strength at the Pd-Cu CMM interface expressed the bonding strength and compatibility of Pd and Cu.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Gas-dynamic spraying method for applying a coating
2. Cold spraying - a materials perspective10.1016/j.actamat.2016.06.034 ↗
3. Computational analysis of the interfacial bonding between feed-powder particles and the substrate in the cold-gas dynamic-spray process10.1016/S0169-4332(03)00643-3 ↗
4. Microstructure and properties of Cu – Cr coatings deposited by cold spraying10.1016/j.vacuum.2019.109032 ↗
5. Cold spray coating: review of material systems and future perspectives10.1179/1743294414Y.0000000270 ↗
6. Cold gas dynamic spray additive manufacturing today: deposit possibilities, technological solutions and viable applications10.1016/j.matdes.2017.07.067 ↗
7. Cold gas dynamic spray technology : a comprehensive review of processing conditions for various technological developments till to date
8. Electrical and mechanical properties of nano-structured TiN coatings deposited by vacuum cold spray10.1016/j.vacuum.2011.06.026 ↗
9. A comparative review on cold gas dynamic spraying processes and technologies
10. Simulation of gas dynamic cold spray process
11. Development of sustainable cold spray coatings and 3D additive manufacturing components for repair/manufacturing applications: a critical review10.3390/coatings7080122 ↗
12. Numerical simulation of deformation behavior of Al particles impacting on Al substrate and effect of surface oxide films on interfacial bonding in cold spraying10.1016/j.apsusc.2006.11.020 ↗
13. Effect of electroplated interlayers on bonding mechanism of cold-sprayed copper on SS316L steel substrate10.1016/j.vacuum.2019.109092 ↗
14. A systematic approach to material eligibility for the cold-spray process10.1361/10599630522738 ↗
15. Deformation behavior of the oxide film on the surface of cold sprayed powder particle10.1016/j.apsusc.2012.07.036 ↗
16. Effect of substrate hardness on the deformation behavior of subsequently incident particles in cold spraying10.1016/j.apsusc.2011.03.126 ↗
17. Computational simulation of cold spray process assisted by electrostatic force10.1016/j.powtec.2007.10.005 ↗
18. Deformation of copper particles upon impact: a molecular dynamics study of cold spray10.1016/j.commatsci.2019.109219 ↗
19. Deposition of copper clusters on the Cu ( 1 1 1 ) surface10.1016/j.susc.2008.02.002 ↗
20. Molecular dynamics simulation of Au cluster depositing on Au surface in cold gas spray
21. Investigation of the process parameters and restitution coefficient of ductile materials during cold gas dynamic spray (CGDS) using finite element analysis
22. Interfacial bonding mechanisms between aluminum and titanium during cold gas spraying followed by friction-stir modi fi cation10.1016/j.apsusc.2018.08.156 ↗
23. Asymmetrical bonding in cold spraying of dissimilar materials10.1016/j.apsusc.2018.03.103 ↗
24. Development of a generalized parameter window for cold spray deposition10.1016/j.actamat.2005.10.005 ↗
25. Splat taxonomy of polymeric thermal spray coating10.1016/j.surfcoat.2011.05.002 ↗
26. Adiabatic shear instability based mechanism for particles/substrate bonding in the cold-gas dynamic-spray process10.1016/j.matdes.2004.03.008 ↗
27. General aspects of interface bonding in kinetic sprayed coatings10.1016/j.actamat.2008.06.003 ↗
28. Bonding mechanism in cold gas spraying10.1016/S1359-6454(03)00274-X ↗
29. New insights into the coating/substrate interfacial bonding mechanism in cold spray10.1016/j.scriptamat.2016.07.024 ↗
30. Adiabatic shear instability is not necessary for adhesion in cold spray10.1016/j.actamat.2018.07.065 ↗
31. Feasibility of numerical simulation methods on the Cold Gas Dynamic Spray ( CGDS ) Deposition process for ductile materials
32. Molecular dynamics simulation study on effect of process parameters on coatings during cold spray process10.1016/j.promfg.2018.07.026 ↗
33. Molecular dynamics simulation of Ti and Ni particles on Ti substrate in the molecular dynamics simulation of Ti and Ni particles on Ti substrate in the cold gas dynamic spray ( CGDS ) process10.4028/www.scientific.net/MSF.828-829.453 ↗
34. Atomistic investigation on the structure – property relationship during thermal spray nanoparticle impact10.1016/j.commatsci.2013.12.011 ↗
35. Simulation study of Pd submonolayer films on Au ( hkl ) and Pt ( hkl ) and their relationship to underpotential deposition10.1021/la990731g ↗
36. Growth and ripening of two-dimensional palladium islands on Ni ( 111 ) surface10.1016/S0039-6028(98)00243-X ↗
37. Behaviors of Palladium in Palladium coated copper wire bonding process10.1109/ICEPT.2009.5270668 ↗
38. Development of palladium nanoparticles deposition on a copper substrate using a molecular dynamic (MD) simulation: a cold gas dynamic spray process
39. Molecular dynamics investigation of temperature effect and surface configurations on multiple impacts plastic deformation in a palladiumcopper composite metal membrane (CMM): a cold gas dynamic spray (CGDS) process10.1016/j.commatsci.2020.109968 ↗
40. Splat shapes in a thermal spray coating Process
41. Cold-spray deposition of Ti2AlC coatings10.1016/j.vacuum.2013.01.023 ↗
42. Fast parallel algorithms for short – range
43. A survey of energies in materials science10.1080/14786430500155080 ↗
44. Structure identification methods for atomistic simulations of crystalline materials10.1088/0965-0393/20/4/045021 ↗
45. Extracting dislocations and non-dislocation crystal defects from atomistic simulation data
46. Automated identification and indexing of dislocations in crystal interfaces10.1088/0965-0393/20/8/085007 ↗
47. Simple analytical embedded-atom-potential model including a long-range force for fcc metals and their alloys10.1103/PhysRevB.54.8398 ↗
48. Computer “experiments” on classical fluids. I. Thermodynamical properties of lennard -jones molecules10.1103/PhysRev.159.98 ↗
49. A configurational temperature Nosé-Hoover thermostat10.1063/1.2013227 ↗
50. Development of a generalized parameter window for cold spray deposition10.1016/j.actamat.2005.10.005 ↗
51. Effect of substrate surface roughening and cold spray coating on the fatigue life of AA2024 specimens10.1016/j.matdes.2013.08.061 ↗
52. Theory of shear banding in metallic glasses and molecular dynamics calculations10.2320/matertrans.MJ200769 ↗
53. Deformation of copper particles upon impact : a molecular dynamics study of cold spray10.1016/j.commatsci.2019.109219 ↗
54. Palladium clusters deposited on the heterogeneous substrates10.1016/j.apsusc.2016.02.220 ↗
55. To the theory of the anomalously high diffusion rate in metals under shock Action : II . Effect of shear stresses and structural and phase state of the diffusion zone on the rate of mass transfer10.1134/S0031918X09050020 ↗
56. A microscopic mechanism for steady state inhomogeneous flow in metallic glass10.1016/0001-6160(77)90232-2 ↗
57. Enhanced diffusion and phase transformations during ultrasonic welding of zinc and aluminum10.1016/j.scriptamat.2004.12.015 ↗
58. Effect of the interfacial bonding strength on the mechanical properties of metal matrix composites10.1163/156855493X00167 ↗
59. Interfacial characteristics of boron nitride nanosheet/epoxy resin Nanocomposites : a molecular dynamics simulation10.3390/app9142832 ↗