Investigating the enhanced kinetics of LiNi0.08Mn1.92O4 cathode material by regulating calcination temperature for long life lithium-ion battery
Source abstract
Abstract
Abstract Various LiNi0.08Mn1.92O4 cathode materials were prepared by a solution combustion method at 500 °C for 1 h combined with two-stage calcination at 600, 650, 700, and 750 °C for 3 h, respectively. Systematic characterization and test approaches were carried out to investigate the effect of calcination temperature on the crystal structure, morphology, electrochemical performance and kinetics properties of the as-obtained LiNi0.08Mn1.92O4 samples. As a result, all the LiNi0.08Mn1.92O4 samples show the intrinsic spinel phase with a good crystallinity. The particles size increases with the increased calcination temperature. Especially, the LiNi0.08Mn1.92O4 sample prepared at 700 °C (LNMO-700) has a great Li+ ion diffusion coefficient and a low apparent activation energy, resulting in an enhanced kinetics. Owing to these merits, the optimized LNMO-700 cathode material exhibits a high initial discharge capacity of 105.0 mAh g−1 and improved retention of 68.6% after 1000 cycles at 1 C, whilst delivers a good rate capability of 95.7 mAh g−1 at a high current rate of 5 C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Extraction and Separation Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Avgouropoulos Combustion-synthesized LixMn2O4-based spinel nanorods as cathode materials for lithium-ion batteries10.1016/j.cej.2016.11.082 ↗
2. Nanocrystalline lithium-manganese oxide spinels for Li-ion batteries-Sol-gel synthesis and characterization of their structure and selected physical properties10.1016/j.ssi.2010.12.003 ↗
3. Recent progress in cathode materials research for advanced lithium ion batteries10.1016/j.mser.2012.05.003 ↗
4. Structural stability of LiMn2O4 electrodes for lithium batteries10.1016/S0378-7753(96)02624-9 ↗
5. Synthesis and electrochemical characterizations of spinel LiMn1.94MO4 (M=Mn 0.06, Mg 0.06, Si 0.06, (Mg 0.03 Si 0.03 )) compounds as cathode materials for lithium-ion batteries10.1016/j.jpowsour.2015.02.049 ↗
6. Research progress in high voltage spinel LiNi0.5Mn1.5O4, material10.1016/j.jpowsour.2010.03.067 ↗
7. Improvement of electrochemical and structural properties of LiMn2O4 spinel based electrode materials for Li-ion batteries10.1016/j.ijhydene.2014.04.107 ↗
8. Electrochemical performance of spinel LiAlxMn2−xO4 prepared rapidly by glucose-assisted solid-state combustion synthesis10.1016/j.vacuum.2015.07.001 ↗
9. Preparation of spinel LiNi0.5Mn1.5O4 and Cr-doped LiNi0.5Mn1.5O4 cathode materials by tartaric acid assisted sol–gel method10.1016/j.ceramint.2014.09.067 ↗
10. Sol–gel synthesis of Co-doped LiMn2O4 with improved high-rate properties for high-temperature lithium batteries10.1016/j.ceramint.2013.09.076 ↗
11. Rapid synthesis of high-cycling performance LiMgxMn2–xO4 (x ≤ 0.20) cathode materials by a low-temperature solid-state combustion method10.1016/j.electacta.2014.01.147 ↗
12. Preparation and electrochemical performance of nano-LiNi0.05Mn1.95O4 cathode materials by a low-temperature molten-salt combustion method10.20964/2017.10.11 ↗
13. Nickel substituted LiMn2O4 cathode with durable high-rate capability for Li-ion batteries10.1039/c3ra42223b ↗
14. Synthesis and characterization of abundant Ni-doped LiNixMn2-xO4 (x = 0.1–0.5) powders by spray-drying method10.1016/j.electacta.2005.11.034 ↗
15. Solution-combustion synthesized nickel-substituted spinel cathode materials (LiNixMn2-xO4; 0≤x≤0.2) for lithium ion battery: enhancing energy storage, capacity retention, and lithium ion transport10.1016/j.electacta.2013.11.080 ↗
16. Spinel LiNixMn2-xO4 as cathode material for aqueous rechargeable lithium batteries10.1016/j.electacta.2013.01.106 ↗
17. Effects of Ni-ion doping on electrochemical characteristics of spinel LiMn2O4 powders prepared by a spray-drying method10.1007/s10008-005-0082-y ↗
18. Microwave-enhanced electrochemical cycling performance of the LiNi0.2Mn1.8O4 spinel cathode material at elevated temperature10.1039/C6CP01873D ↗
19. Synthesis and electrochemical properties of spinel Li(Li0.05Cu0.05Mn1.90)O4 by a flameless combustion method10.1016/j.jallcom.2016.01.202 ↗
20. Synthesis and electrochemical characterization of multi-cations doped spinel LiMn2O4 used for lithium ion batteries10.1016/j.jpowsour.2011.09.062 ↗
21. Lattice parameter as a measure of electrochemical properties of LiMn2O410.1016/S0378-7753(01)00685-1 ↗
22. An observation of peak split in high temperature CV studies on Li-stoichiometric spinel LiMn2O4 electrode10.1016/j.jpowsour.2003.08.010 ↗
23. (Li, Al)-co-doped spinel Li(Li0.1Al0.1Mn1.8)O4 as high performance cathode for lithium ion batteries10.1016/j.electacta.2012.10.011 ↗
24. Enhanced cycle and rate performances of Li(Li0.05Al0.05Mn1.90)O4 cathode material prepared via a solution combustion method for lithium-ion batteries10.1016/j.ssi.2017.04.014 ↗
25. Ni, Mo Co-doped lithium manganate with significantly enhanced discharge capacity and cycling stability10.1016/j.electacta.2016.04.148 ↗
26. Facile pH-mediated synthesis of morphology-tunable MnCO3 and their transformation to truncated octahedral spinel LiMn2O4 cathode materials for superior lithium storage10.1039/C4TA06522K ↗
27. Porous LiMn2O4 nanorods with durable high-rate capability for rechargeable Li-ion batteries10.1039/c1ee01795k ↗
28. Effect of Al-doping on the electrochemical properties of a three-dimensionally porous lithium manganese oxide for lithium-ion batteries10.1016/j.electacta.2012.04.136 ↗
29. Study on Li+ -ion diffusion in nano-crystalline LiMn2O4 thin film cathode grown by pulsed laser deposition using CV, EIS and PITT techniques10.1016/j.matchemphys.2008.03.041 ↗
30. Study on the enhanced electrochemical performance of LiMn2O4 cathode material at 55°C by the nano Ag-coating10.1016/j.jelechem.2015.02.016 ↗
31. Enhanced elevated-temperature performance of LiAl x Si 0.05 Mg 0.05 Mn 1.90-x O 4, (0≤x≤0.08) cathode materials for high-performance lithium-ion batteries10.1016/j.electacta.2016.03.121 ↗
32. High temperature dielectric properties of cubic bismuth zinc tantalite10.1016/j.ceramint.2008.08.006 ↗
33. Rapid synthesis of Li4Ti5O12 microspheres as anode materials and its binder effect for lithium-ion battery10.1021/jp2039256 ↗
34. Alpha-CuV2O6 nanowires: hydrothermal synthesis and primary lithium battery application10.1021/ja800109u ↗