journal article·2017-12

Preparation of carbon based getter for glass fiber core vacuum insulation panels (VIPs) used on marine reefer containers

Q.R. Zheng, Z.W. Zhu, J. Chen, W.S. Yu

Vacuum· Volume 146
Publisher page

Abstract

Abstract Mechanism of adsorption instead of chemical reaction was employed to develop a getter for glass fiber core VIPs used on marine reefer containers. A programmed temperature gas chromatography-mass spectrometer method was designed to detect the released gases from the core at temperature 50 °C-290 °C. Adsorption equilibrium data of water vapor, ethylene, propylene and hydrogen at temperature 298.15 K and pressure 0–500 Pa were measured on silica gel (SBET = 300 m2/g), carbon molecular sieve (SBET = 810 m2/g) and activated carbon (SBET = 1916 m2/g). The activated carbon sample was undergone surface modification and then mixed with the same amount of expanded graphite (ENG) to form the getter JMU-01. Comparisons were made in terms of adsorption capacities and thermal conductivities of getters, VIPs and VIP composite plates. It shows that, at 273.15 K and 0–1 kPa, adsorption for ethylene, propylene and hydrogen on JMU-01 had maximum increment 242.42%, 272.65% and 85.24% than currently available getter SAT-01 containing desiccant and lithium-barium alloys. Within temperature range 15°C–60 °C, thermal conductivities of VIPs and VIP composite plates prepared by above two getters were nearly equal with a mean value respectively about 0.00245 W/(m °C) and 0.00443 W/(m °C). It suggests that surface modification and densification by ENG on activated carbon may be a possible solution to synthesizing the getter.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aerogels and thermal insulation · Spacecraft and Cryogenic Technologies · Membrane Separation and Gas Transport

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Applying a time-space network to reposition reefer containers among major Asian ports
2. Methodologies for estimating shipping emissions and energy consumption: a comparative analysis of current methods10.1016/j.energy.2015.04.083 ↗
3. Energy use of integral refrigerated containers in maritime transportation10.1016/j.enpol.2010.12.015 ↗
4. Vacuum insulation panel products: a state-of-the-art review and future research pathways10.1016/j.apenergy.2013.11.032 ↗
5. Application of vacuum insulation panels in the cold chain-analysis of viability10.1016/j.ijrefrig.2014.07.010 ↗
6. Review of vacuum insulation panel technology and its develpoment
7. Vacuum Insulation Panels-exciting thermal properties and most challenging applications10.1007/s10765-006-0106-6 ↗
8. Vacuum insulation properties of phenolic foam10.1016/j.ijheatmasstransfer.2012.05.051 ↗
9. An apparatus to measure the thermal conductivity of insulation panels at sub-ambient temperature10.1016/j.ijrefrig.2016.11.022 ↗
10. Application of vacuum insulation panels in the cold chain- analysis of viability10.1016/j.ijrefrig.2014.07.010 ↗
11. Thermo-physical properties of polyester fiber reinforced fumed silica/hollow glass microsphere composite core and resulted vacuum insulation panel10.1016/j.enbuild.2016.05.013 ↗
12. Optimization of glass fiber based core materials for vacuum insulation panels with laminated aluminum foils as envelopes10.1016/j.vacuum.2013.04.005 ↗
13. Low cost composites for vacuum insulation core material10.1016/j.vacuum.2016.05.027 ↗
14. Vacuum maintenance in vacuum insulation panels exemplified with a staggered beam VIP
15. Quality control of vacuum insulation panels: methods of measuring gas pressure10.1016/j.vacuum.2007.10.015 ↗
16. Optimizing the thermal effectiveness of an insulation wrap with internal folded polypropylene film for the transportation of frozen food10.1016/j.ijrefrig.2016.03.021 ↗
17. A review of vacuum degradation research and the experimental outgassing research of the core material-Pu foam on Vacuum Insulation Panels10.1016/j.phpro.2012.03.549 ↗
18. Developments in the open cell foam-filled vacuum insulated panels for appliances applications10.1177/0021955X9903500503 ↗
19. Xu · 2011
20. Gas permeation characteristics through heat-sealed flanges of vacuum insulation panels10.1016/j.vacuum.2014.01.008 ↗
21. Thermal insulation property and service life of vacuum insulation panels with glass fiber chopped strand as core materials10.1016/j.enbuild.2014.01.010 ↗
22. Outgassing characteristics of a polycarbonate core material for vacuum insulation panels10.1016/j.vacuum.2010.12.009 ↗
23. Outgassing of a thin wall vacuum insulating panel10.1016/S0042-207X(97)00179-6 ↗
24. Investigation of composite getter for vacuum insulation panels
25. Chen · 2015
26. Analysis of adsorptive performance of getters used on a vacuum insulation panel
27. Preparation of novel getters for vacuum insulation panels used on marine reefer containers
28. ASTM C1484 -10. Standard Specification for Vacuum Insulation Panels.
29. Yang · 2003
30. Modified activated carbon for the removal of copper, zinc, chromium and cyanide from wastewater10.1016/S1383-5866(01)00155-1 ↗
31. The effect of certain metallic derivatives on the adsorption of sulphur dioxide on active carbon10.1016/S0008-6223(00)00134-2 ↗
32. Adsorption of SO2 using vanadium-copper supported on activated carbon10.1016/S0920-5861(02)00335-8 ↗
33. Hydrogen spillover to enhance hydrogen storage-study of the effect of carbon physicochemical properties10.1016/j.apcata.2004.01.019 ↗
34. Selective catalytic reduction of nitric oxide with hydrogen on supported Pd: enhancement by hydrogen spillover10.1016/j.apcata.2016.01.013 ↗
35. Development of composite adsorbents and storage vessels for domestically used adsorbed natural gas10.1016/j.applthermaleng.2015.12.127 ↗