Three-step vacuum separation for treating arsenic sulphide residue
Source abstract
Abstract
Abstract Up to now, most of arsenic sulphide residue can't be properly disposed. The traditional processes for treating arsenic sulphide residue have some widespread drawbacks such as the complex process, the high cost in operation, and the less than satisfactory removal effect and environmental protection. In view of this, a process of three-step vacuum separation was proposed for treating arsenic sulphide residue in this work. During vacuum separation, elemental sulphide and arsenic trioxide could be recovered effectively in primary distillation at temperature of 180 °C, distillation time of 2.0 h, corresponding to the residual gas pressure of 15 Pa. In secondary distillation, arsenic sulfide was obtained under the condition of 450 °C for 30 min, with a residual gas pressure of 15 Pa. When the temperature increased to 1000 °C for 2 h, lead sulfide was evaporated out in third distillation. Through the three-step vacuum separation, calcium fluoride was left behind in the third distilland, in which the content of arsenic was 5.65 × 10 −4 wt.%. Correspondingly, the removal rate of arsenic was almost 100%. The vacuum process is expected to be effectively employed for recycling valuable components from arsenic sulphide residue, and meanwhile eliminating its pollution.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Arsenic contamination and mitigation · Extraction and Separation Processes · Metal Extraction and Bioleaching
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. The management of arsenic wastes:problems and prospects10.1016/S0304-3894(00)00188-6 ↗
2. Ravenscroft · 2009
3. Arsenic removal from water/wastewater using adsorbents-a critical review10.1016/j.jhazmat.2007.01.006 ↗
4. Treatment of arsenic contaminated water in a batch reactor by using Ralstonia eutropha MTCC 2487 and granular activated carbon10.1016/j.jhazmat.2007.09.028 ↗
5. Adsorption and desorption of arsenic on an oxisol and its constituents10.1016/j.watres.2004.02.002 ↗
6. Removing and stabilizing arsenic from copper refining circuits by hydrothermal processing10.1007/s11837-999-0155-y ↗
7. Study on the mechanism of apoptosis-related gene PNAS-2 in APL cells treated by arsenic sulfide
8. Dissection of mechanisms of Chinese medicinal formula Realgar-Indigo naturalis as an effective treatment for promyelocytic leukemia10.1073/pnas.0712365105 ↗
9. A systems biology understanding of the synergistic effects of arsenic sulfide and imatinib in BCR/ABL-associated leukemia10.1073/pnas.0813142106 ↗
10. Arsenic compounds as anticancer agents10.1007/s002800100309 ↗
11. Bowen's precancerous dermatosis and multiple benign superficial epithelioma: evidence of arsenic as an etiologic agent10.1001/archderm.1932.01450031054011 ↗
12. Arsenic disposal practices in the metallurgical industry10.1179/cmq.2001.40.4.395 ↗
13. Commercial scale test of anti-pollution control technique for slag of arsenic and soda
14. Armando · 2000
15. Removing arsenic from anode slime by vacuum dynamic evaporation and vacuum dynamic flash reduction10.1016/j.vacuum.2011.10.023 ↗
16. Removal of arsenic and antimony from anode slime by vacuum dynamic flash reduction10.1021/es103424u ↗
17. Dai · 2000
18. Kubaschewski · 1979
19. Speight · 2005