journal article·2012-07

Suction force of vibrating suction method based on pi theorem: Analysis and experiment

Kun Wang, Wei Wang, Houxiang Zhang, Jiancheng Fang

Vacuum· Volume 86· Issue 12
Publisher page

Abstract

Abstract This paper presents an analysis method for calculating the suction force generated by the vibrating suction method, which is used for mini wall-climbing robots. Using this analysis method, an empirical equation based on the pi theorem was deduced. To verify the validity and feasibility of the empirical equation, an experimental platform was developed, and a series of vibrating experiments were performed. In the experiments, the sine vibration mode was chosen as a special case to determine the two coefficients of the empirical equation in the experimental condition of a certain suction cup and working plane. Then, the calculated suction force and the real suction force were compared and analysed. The results indicate that the empirical equation will satisfy the engineering application with a small margin of error if the amplitude and angular frequency of the vibrating suction method are not too small. In addition, the effect of amplitude and frequency on the average suction force of the sine vibration mode was also analysed and tested.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Soft Robotics and Applications · Hydraulic and Pneumatic Systems · Robot Manipulation and Learning

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. Rosa · Mechatronics · 2002 · 12 · 7110.1016/S0957-4158(00)00046-5 ↗
2. Bruno · 2008
3. Fischer W, Tâche F, Siegwart R. Inspection system for very thin and fragile surfaces, based on a pair of wall climbing robots with magnetic wheels. In: Proceedings of the 2007 IEEE/RSJ international conference on intelligent robots and systems. San Diego, CA, USA; 2007. p. 1216–1221.10.1109/IROS.2007.4399060 ↗
4. Sensing and gait planning of quadruped walking and climbing robot for traversing in complex environment10.1016/j.robot.2009.11.007 ↗
5. Theoretical and experimental study of the performance of flat suction cups in the presence of tangential loads10.1016/j.mechmachtheory.2011.01.003 ↗
6. A hybrid pole climbing and manipulating robot with minimum DOFs for construction and service applications10.1108/01439910510582309 ↗
7. Kim Sangbae, Spenko Matthew, Trujillo Salomon, Heyneman Barrett, Santos Daniel, Cutkosky Mark R. Smooth vertical surface climbing with directional adhesion 2008; 24: 65–74.10.1109/TRO.2007.909786 ↗
8. Zhu Tao, Liu Rong, Wang Xudong, Wang Kun. Principle and application of vibrating suction method. In: Proceedings of the 2006 IEEE international conference on robotics and biomimetics. Kunming, China; 2006. p. 491–495.10.1109/ROBIO.2006.340241 ↗
9. Principle and experiment of vibrating suction method for wall-climbing robot10.1016/j.vacuum.2010.04.010 ↗
10. Development and experiment of wall-climbing caterpillar robot10.4028/www.scientific.net/AMR.308-310.2031 ↗
11. Analytical modelling of suction cups used for window-cleaning robots10.1016/j.vacuum.2005.10.002 ↗
12. Model experiments and the form of empirical equations
13. Wu Wangyi. Hydrodynamics. 1st ed. China: Beijing; 1982.