journal article·2011-11

Effect of SiO2 buffer layer thickness on the properties of ITO/Cu/ITO multilayer films deposited on polyethylene terephthalate substrates

Xingwei Ding, Jinliang Yan, Ting Li, Liying Zhang

Vacuum· Volume 86· Issue 4
Publisher page

Abstract

Abstract Transparent conductive ITO/Cu/ITO films were deposited on polyethylene terephthalate (PET) substrates with a SiO 2 buffer layer by magnetron sputtering using three cathodes at room temperature. The effect of the SiO 2 buffer layer thickness on the electrical and optical properties of ITO/Cu/ITO films was investigated. The ITO/Cu/ITO film deposited on the 40 nm thick SiO 2 buffer layer exhibits a sheet resistance of 143Ω/sq and transmittance of 65% at 550 nm wavelength. Highly transparent ITO/Cu/ITO films with a transmittance of 80% and a sheet resistance of 98.7Ω/sq have been obtained by applying −60 V substrate bias.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · GaN-based semiconductor devices and materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Effect of TiO2 buffer layer thickness on properties of ITZO films deposited on flexible substrate10.1016/j.surfcoat.2010.08.019 ↗
2. Preparation of high quality ITO films on a plastic substrate using RF magnetron sputtering10.1016/j.surfcoat.2006.01.004 ↗
3. Growth of gallium oxide thin films on silicon by the metal organic chemical vapor deposition method10.1016/j.mseb.2004.01.012 ↗
4. Low temperature deposition of transparent conducting ITO/Au/ITO films by reactive magnetron sputtering10.1016/j.apsusc.2009.10.002 ↗
5. Large-grain polycrystalline silicon film by sequential lateral solidification on a plastic substrate10.1016/j.tsf.2005.08.002 ↗
6. Development of low temperature RF magnetron sputtered ITO films on flexible substrate10.1016/j.solmat.2010.03.037 ↗
7. Influence of ZnO buffer layer thickness on the electrica and optical properties of indium zinc oxide thin films deposited on PET substrates10.1016/j.ceramint.2007.09.083 ↗
8. A study of amorphous and crystalline phases in In2O3–10 wt% ZnO thin films deposited by DC magnetron sputtering10.1016/j.tsf.2005.08.255 ↗
9. Dependence of intermediated noble metals on the optical and electrical properties of ITO/metal/ITO multilayers10.1016/j.optcom.2008.12.044 ↗
10. ITO/metal/ITO multilayer structures based on Ag and Cu metal films for high-performance transparent electrodes10.1016/j.solmat.2008.02.038 ↗
11. Annealing effect of ITO and ITO/Cu transparent conductive films in low pressure hydrogen atmosphere10.1016/j.mseb.2005.12.013 ↗
12. Effect of growth temperature on ZnO thin film deposited on SiO2 substrate10.1016/S0921-5107(02)00754-7 ↗
13. Characteristics of ZnO–Cu–ZnO multilayer films on copper layer properties10.1016/j.apsusc.2006.01.023 ↗
14. Transparent conductive ZnO: Al thin films deposited on flexible substrates prepared by direct current magnetron sputtering10.1016/j.tsf.2005.09.110 ↗
15. Effect of the Cu underlayer on the optoelectrical properties of ITO/Cu thin films10.1016/j.renene.2009.05.017 ↗
16. The underlayer effects on the electrical resistivity of Ag thin film10.1016/j.tsf.2005.07.279 ↗