journal article·2021-06

Characterization of Ti–Zr–V thin films deposited by DC and unipolar pulsed DC magnetron sputtering

Sihui Wang, Wei Wei, Yonghao Gao, Haibin Pan, Yong Wang

Vacuum· Volume 188
Publisher page

Abstract

Abstract Ternary Ti–Zr–V getter films with approximately equal atomic concentrations were deposited on oxygen free copper substrates by magnetron sputtering using DC and unipolar pulsed DC current modes. The thin film morphologies were studied using scanning electron microscopy, atomic force microscopy, while their chemical and phase compositions were investigated by energy dispersive spectroscopy and X-ray diffraction, respectively. The chemical states within the superficial regions of the films were characterized by X-ray photoelectron spectroscopy in ultra-high vacuum. The results indicate that both current modes promote formation of porous thin films, while the microstructure of the DC film is much finer than that of the unipolar pulsed DC film. Initially, the thin films were covered by oxides of Ti, Zr and V that are reduced upon annealing treatment; those within the DC film present faster reduction kinetics as compared with that of the unipolar pulsed DC film.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Semiconductor materials and devices · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Longitudinal and transverse dynamics of ions from residual gas in an electron accelerator10.1103/PhysRevAccelBeams.21.054401 ↗
2. Interactions of beams with surroundings
3. Broggi · 2009 · PAC09
4. Evaluation of beam halo from beam-gas scattering at the KEK Accelerator Test Facility10.1103/PhysRevAccelBeams.21.051001 ↗
5. He · 2017
6. Malyshev · 2020 · 175
7. Prodromides · 2002
8. Lain Amador · 2019
9. Pumping properties of Ti–Zr–Hf–V non-evaporable getter coating10.1016/j.vacuum.2013.07.035 ↗
10. Single metal zirconium non-evaporable getter coating10.1016/j.vacuum.2020.109510 ↗
11. Electron stimulated desorption from cryogenic NEG-coated surfaces
12. Development and characterization of non-evaporable getter thin films with Ru seeding layer for MEMS applications10.3390/mi9100490 ↗
13. Decreasing surface outgassing by thin film getter coatings10.1016/S0042-207X(98)00017-7 ↗
14. Vacuum properties of TiZrV non-evaporable getter films10.1016/S0042-207X(00)00246-3 ↗
15. Comparative study of photodesorption from TiZrV coated and uncoated stainless steel vacuum chambers10.1016/j.vacuum.2004.01.080 ↗
16. Deposition and in-situ characterization of Ti–Zr–V alloy thin films annealed at different temperatures under ultra-high vacuum conditions10.1016/j.jallcom.2015.08.040 ↗
17. Lozano · 2000 · 30 · 623
18. Ti–Zr–V non-evaporable getter films: from development to large scale production for the Large Hadron Collider10.1016/j.tsf.2005.12.218 ↗
19. Comparison of Ti-Zr-V nonevaporable getter films deposited using alloy or twisted wire sputter-targets10.1116/1.3504600 ↗
20. Comparative study of Ar-implanted Ti-Zr-V non-evaporable getter films on the Al-alloy substrate10.1063/1.5034196 ↗
21. Influence of the elemental composition and crystal structure on the vacuum properties of Ti–Zr–V nonevaporable getter films10.1116/1.1414122 ↗
22. Lowering the activation temperature of TiZrV non-evaporable getter films10.1016/S0042-207X(00)00243-8 ↗
23. Activation characterization of the Ti-Zr-V getter films deposited by magnetron sputtering10.1016/j.apsusc.2020.147059 ↗
24. Benvenuti · 2002
25. Malyshev · 2009 · 27 · 521
26. Characterization of activated non-evaporable porous Ti and Ti–Zr–V getter films by synchrotron radiation photoemission spectroscopy10.1016/j.tsf.2006.07.052 ↗
27. Thornton · 1977 · vol. 7 · 239
28. Influence of the substrate coating temperature on the vacuum properties of Ti–Zr–V non-evaporable getter films10.1016/S0042-207X(02)00755-8 ↗
29. Contamination of magnetron sputtered metallic films by oxygen from residual atmosphere in deposition chamber10.1002/ppap.201400172 ↗
30. 3 - sputtering phenomena
31. Effect of coating morphology on the electron stimulated desorption from Ti–Zr–Hf–V nonevaporable-getter-coated stainless steel10.1016/j.vacuum.2012.04.033 ↗
32. Studies of thin films of Ti- Zr -V as non-evaporable getter films prepared by RF sputtering10.1063/1.4791277 ↗
33. X-ray photoelectron spectroscopy: towards reliable binding energy referencing10.1016/j.pmatsci.2019.100591 ↗
34. C 1s peak of adventitious carbon aligns to the vacuum level: dire consequences for material's bonding assignment by photoelectron spectroscopy10.1002/cphc.201700126 ↗
35. Exploration into the valence band structures of organic semiconductors by angle-resolved photoelectron spectroscopy
36. Moulder · 1992
37. Development of copper electroformed vacuum chambers with integrated non-evaporable getter thin film coatings
38. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Sc, Ti, V, Cu and Zn10.1016/j.apsusc.2010.07.086 ↗
39. XPS and He II photoelectron yield study of the activation process in Ti–Zr NEG films10.1016/S0042-207X(02)00760-1 ↗
40. Ellingham diagrams
41. Near-surface chemistry in Zr 2 Fe and ZrVFe studied by means of X-ray photoemission spectroscopy: a temperature-dependent study10.1116/1.1308591 ↗