journal article·2018-10

Tailoring of the interface morphology of WS2/CrN bilayered thin film for enhanced tribological property

Desheng Wang, Ming Hu, Xiaoming Gao, Dong Jiang, Yanlong Fu, Lijun Weng, Jiayi Sun

Vacuum· Volume 156
Publisher page

Abstract

Abstract The WS 2 /CrN bilayered films with different interface morphologies between WS 2 and CrN layer were prepared by physical vapor deposition. By controlling the deposition parameters, the surface of CrN interlayer exhibited compact granular structure when deposited under low partial pressure of Ar while a cone array-like surface appeared under high Ar partial pressure. The surface texture of the CrN interlayer had a great effect on the tribological performance of the WS 2 /CrN film. The compact CrN textured WS 2 film exhibited a wear life about 2.6 × 10 5 cycles while the optimal cone array-like CrN textured WS 2 film showed a much longer wear life reaching to 6.8 × 10 5 cycles, which was more than 2.6 times of that for compact CrN textured WS 2 film and 3.5 times of that for WS 2 film without the CrN interlayer. The improved tribological property of the optimal cone array-like CrN textured WS 2 film was attributed to the high adhesion between the WS 2 layer and the CrN interlayer. Meanwhile, the reservoir and replenishment of the WS 2 lubricant by the CrN nanocones during the friction made a significant contribution for the long wear life.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Tribology and Wear Analysis · Adhesion, Friction, and Surface Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Performance of CrN/MoS2(Ti) coatings for high wear low friction applications10.1016/S0257-8972(02)00885-X ↗
2. Thin films of fullerene-like MoS2 nanoparticles with ultra-low friction and wear10.1038/35025020 ↗
3. Tribology of Co-sputtered nanocomposite Au/MoS2 solid lubricant films over a wide contact stress range10.1023/B:TRIL.0000044490.03462.6e ↗
4. Response of RF-sputtered MoS2 composite films to LEO space environment10.1016/j.vacuum.2017.07.021 ↗
5. Tribological behavior of nanocomposite coatings based on fullerene-like structures10.1016/j.vacuum.2010.11.019 ↗
6. Influence of substrate bias on structural and tribo-mechanical properties of pulsed magnetron sputtered TiN-WSx hard-lubricious coating10.1016/j.triboint.2018.03.005 ↗
7. Influence of Ti addition on the structure and properties of low-friction W–S–C coatings10.1016/j.surfcoat.2013.05.032 ↗
8. Complex frictional analysis of self-lubricant W-S-C/Cr coating10.1039/c2fd00003b ↗
9. Influence of micro/nano-textures and chemical modification on the nanotribological property of Au surface10.1016/j.colsurfa.2010.06.006 ↗
10. Effective solution for the tribological problems of Ti-6Al-4V: combination of laser surface texturing and solid lubricant film10.1016/j.surfcoat.2012.06.014 ↗
11. Preparation of tungsten disulfide (WS2) soft-coated nano-textured self-lubricating tool and its cutting performance10.1007/s00170-013-4827-y ↗
12. Effect of micro/nano-textures and burnished MoS2 addition on the tribological properties of PVD TiAlN coatings against AISI 316 stainless steel10.1016/j.surfcoat.2016.03.008 ↗
13. Preparation and characterization of the CrN nanocone array textured WS2 film10.1016/j.matlet.2016.10.115 ↗
14. Fabrication and tribological properties of Al2O3/TiC ceramic with nano-textures and WS2/Zr soft-coatings10.1016/j.surfcoat.2014.08.014 ↗
15. Effect of SiC particle impact nano-texturing on tribological performance of 304L stainless steel10.1016/j.apsusc.2014.06.173 ↗
16. Laser surface texturing for adaptive solid lubrication10.1016/j.wear.2006.03.013 ↗
17. Nanotribological properties of silicon nano-pillars coated by a Z-DOL lubricating film10.1007/s12206-009-1128-3 ↗
18. Microstructure, mechanical properties and tribological performance of TiSiN–WS2 hard-lubricant coatings10.1016/j.apsusc.2014.05.012 ↗
19. Influence of multi-interfacial structure on mechanical and tribological properties of TiSiN/Ag multilayer coatings10.1007/s10853-016-0545-9 ↗
20. On tribological behaviour and application of TiN and MoS2-Ti composite coating for enhancing performance of monolayer cBN grinding wheel10.1016/j.wear.2010.01.013 ↗
21. Structure, mechanical and tribological characterisations of pulsed DC magnetron sputtered TiN-WSx composite coating10.1016/j.vacuum.2016.05.003 ↗
22. Tribology of tungsten disulfide–nanocrystalline zinc oxide adaptive lubricant films from ambient to 500°C10.1016/S0043-1648(99)00329-4 ↗
23. Solid lubricant materials for high temperatures—a review10.1016/0301-679X(82)90089-5 ↗
24. The Thermal Stability and Friction of the Disulfides and Ditellurides of Molybdenum and Tungsten in Vacuum (10-9 to 10-6 Torr). NASA TN D5141, 1969.
25. Annealing effects on microstructural, optical, and mechanical properties of sputtered CrN thin film coatings: experimental studies and finite element modeling10.1016/j.jallcom.2018.04.012 ↗
26. Thermal stability behaviors of Cr(N,O)/CrN double-layered coatings by TGA/DTA analysis10.1016/j.surfcoat.2006.09.029 ↗
27. Structure and thermal properties of TiAlN/CrN multilayered coatings with various modulation ratios10.1016/j.surfcoat.2016.07.055 ↗
28. Thermal stability of nitride thin flms10.1016/S0042-207X(00)00143-3 ↗
29. Effect of sputtering power on the chemical composition, microstructure and mechanical properties of CrNx hard coatings deposited by reactive magnetron sputtering10.1016/j.vacuum.2017.08.036 ↗
30. The improved corrosion resistance of sputtered CrN thin films with Cr-ion bombardment layer by layer10.1016/j.vacuum.2017.06.040 ↗
31. Effect of power and nitrogen content on the deposition of CrN films by using pulsed dc magnetron sputtering plasma10.1088/1009-0630/15/7/12 ↗
32. A mechanical and tribological study of Cr/CrN multilayer coatings10.1016/j.matchemphys.2015.04.015 ↗
33. Structural, mechanical and tribological investigations of sputter deposited CrN–WS2 nanocomposite solid lubricant coatings10.1016/j.triboint.2011.07.007 ↗
34. Frictional and morphological properties of Au-MoS2 films sputtered from a compact target10.1016/0040-6090(84)90207-4 ↗
35. Growth, structure and friction behavior of titanium doped tungsten disulphide (Ti-WS2) nanocomposite thin films10.1016/j.tsf.2009.02.103 ↗
36. Microstructure of cosputter-deposited metal- and oxide-MoS2 solid lubricant thin films10.1557/JMR.1998.0143 ↗
37. Photosensor device based on few-layered WS2 films10.1002/adfm.201300760 ↗
38. Controlled synthesis and transfer of large-area WS2 sheets: from single layer to few layers10.1021/nn400971k ↗
39. Effect of post-annealing on laser-ablation deposited WS 2 thin films10.1016/j.vacuum.2018.03.024 ↗
40. Morphology evolution of Ag alloyed WS2 films and the significantly enhanced mechanical and tribological properties10.1016/j.surfcoat.2013.10.074 ↗