Microstructure and mechanical properties of Al-Ti-Zr intermetallic compounds prepared by vacuum hot pressing
Source abstract
Abstract
Abstract Al-Ti-Zr ternary system with different compositions (Al 40, 41, 43, 50 at.%) was synthesized by in-situ reaction of ZrH2, TiH2 and Al powders through vacuum hot pressing at 1400 °C for 0.5 h under 40.8 MPa. The microstructure, micro hardness, fracture toughness, and flexural strength of Al-Ti-Zr alloys were investigated. AlTi2 + TiAl and Zr(Ti)Al + Al3(Ti, Zr)5 new lamellar structures were found in the samples. Micro hardness increased while flexural strength and fracture toughness decreased with the increasing of the ratio of Al-Zr intermetallics. Flexural strength and fracture toughness of Al43 were the highest reaching up to 396.0 MPa and 6.0 MPa.m1/2, respectively. The fracture modes of Ti3Al + TiAl, AlTi2 + TiAl and Zr(Ti)Al + Al3(Ti, Zr)5 lamellar structures were transgranular fractures, while fracture modes of Al-Zr intermetallics were intergranular fractures. The crack tip blunting and the effect of crack deflecting in Ti3Al + TiAl lamella led to increasing of flexural strength and fracture toughness. Besides, interlayer tearing of the three lamellar structures led to rising of flexural strength.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. An updated thermodynamic modeling of the Al-Zr system
2. Structure and mechanical properties of Ti–6Al–4V alloy after zirconium addition10.1016/j.msea.2012.05.043 ↗
3. Microstructure, billet surface quality and tensile property of (Al2O3 + Al3Zr) p/Al composites in situ synthesized with electromagnetic field10.1016/j.jallcom.2011.02.139 ↗
4. Superplasticity behavior and deformation mechanism of the in-situ Al3Zr/6063Al composites processed by friction stir processing10.1016/j.jallcom.2017.03.246 ↗
5. Temperature dependent lattice misfit and coherency of Al3X (X = Sc, Zr, Ti and Nb) particles in an Al matrix10.1016/j.actamat.2015.02.004 ↗
6. The Al-Zr (aluminum-zirconium) system10.1007/BF02667556 ↗
7. First-principles investigations on the phase stability, elastic and thermodynamic properties of Zr–Al alloys10.1142/S0129183115501430 ↗
8. Watson · 1956 · 123
9. Dislocations in complex materials10.1126/science.1105962 ↗
10. Ab initio, calculation of the total energy and elastic properties of Laves phase C15 Al2RE (RE = Sc, Y, La, Ce–Lu)10.1016/j.commatsci.2008.03.036 ↗
11. Stability, elastic properties and electronic structures of the stable Zr–Al intermetallic compounds: a first-principles investigation10.1016/j.jallcom.2013.12.079 ↗
12. Pressure and tension effects on mechanical properties of ZrAl210.1063/1.4903171 ↗
13. Cluster characteristics and physical properties of binary Al-Zr intermetallic compounds from first principles studies10.1016/j.commatsci.2015.03.039 ↗
14. Preparation of TiAl-Cr surface alloy by plasma-surface alloying technique10.1016/j.vacuum.2012.07.016 ↗
15. Effect of Mo-alloyed layer on oxidation behavior of TiAl-based alloy10.1016/j.vacuum.2012.05.015 ↗
16. A novel powder metallurgy processing approach to prepare fine-grained Ti-rich TiAl-based alloys from pre-alloyed powders10.1016/j.intermet.2013.06.006 ↗
17. Microstructure and mechanical properties of Ti–22Al–25Nb alloy fabricated by elemental powder metallurgy10.1016/j.msea.2015.12.037 ↗
18. Microstructural evolution and mechanical properties of a β-solidifying γ-TiAl alloy densified by spark plasma sintering10.1016/j.intermet.2015.07.003 ↗
19. Isothermal section of Al–Ti–Zr ternary system at 1273K10.1016/j.jallcom.2013.09.082 ↗
20. Crack propagation behavior in TiAl-Nb single and Bi-PST crystals10.1016/j.intermet.2006.12.004 ↗
21. The crystal structure of ZrAl210.1107/S0365110X59001943 ↗
22. Microstructure and oxide particle stability in a novel ODS γ-TiAl alloy processed by spark plasma sintering and laser additive manufacturing10.1016/j.intermet.2017.07.004 ↗
23. Effect of sintering temperature on the microstructure and mechanical properties of Ti50Ni50 and Ti47Ni47Al6 intermetallic alloys10.1016/j.jallcom.2013.05.164 ↗
24. Vacuum brazing TiAl to Ti3Al using two ti-based filler metals10.1007/s40194-015-0239-y ↗
25. Effect of carbon reactant on microstructures and mechanical properties of TiAl/Ti2AlC composites10.1016/j.msea.2016.12.069 ↗
26. Defect structures and room-temperature mechanical properties of C15 Laves phase in Zr-X-Cr (X: Nb, Ta and Hf) alloy systems10.4028/www.scientific.net/MSF.502.169 ↗
27. Microstructural and mechanical characterization of Nb-based in situ composites from Nb-Si-Ti ternary system10.1016/j.actamat.2007.08.012 ↗
28. Microstructure characterization and fracture toughness of Laves phase-based Cr–Nb–Ti alloys10.1007/s40195-015-0227-7 ↗
29. On the toughening mechanisms of MoSi2, reinforced Si3N4, ceramics10.1007/s00339-006-3752-4 ↗
30. Effect of ternary additions on mechanical properties of TiAl10.1016/S1359-6454(97)00422-9 ↗
31. Microstructural and mechanical properties of dual Ti3AlC2-Ti2AlC reinforced TiAl composites fabricated by reaction hot pressing10.1016/j.ceramint.2014.02.092 ↗
32. Micro structural characterization and mechanical properties of TiAl-Al2Ti4C2-Al2O3-TiC in situ composites by hot-press-aided reaction synthesis10.1016/j.jallcom.2005.07.024 ↗
33. Fracture behavior and toughness of PST crystals of TiAl10.1016/1359-6454(95)00255-3 ↗