Effects and mechanisms of an alternating current field on pack boriding
Source abstract
Abstract
Abstract An alternating current field (ACF) was applied to AISI 1045 steel samples and boriding media for enhancing pack boriding. Effects of the ACF on temperature changes of treated samples, reaction extents of boriding media, as well as on boride layers' growth and hardness distribution, were investigated for revealing mechanisms for the enhancement. A temperature rise caused by the ACF is detected, and it increases with increasing ACF current and decreases with increasing furnace soaking temperature. Reactions of boriding media are proved being intensified by the ACF. Pack boriding, in terms of boride layer thickness, is enhanced by the ACF, and the enhancement is increased with increasing the ACF current. The Vickers' hardness distribution along the boride layers depth to the substrate can be optimized by applying ACF. It is shown that the temperature rise caused by the ACF is not the main reason for enhancing boride growth and modifying layers' phases. Mechanisms for the ACF's effects are given by concerning the ACF's thermal and non-thermal functions. The non-thermal effect is more effective than the thermal effect in intensifying reactions and diffusions in pack boriding.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Intermetallics and Advanced Alloy Properties · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Davis · 2002
2. Engineering the surface with boron based materials10.1179/sur.1985.1.3.203 ↗
3. Boronizing to produce wear-resistant surface layer
4. The growth of single Fe2B phase on low carbon steel via phase homogenization in electrochemical boriding (PHEB)10.1016/j.surfcoat.2011.08.049 ↗
5. Enhanced boronizing kinetics of alloy steel assisted by surface mechanical attrition treatment10.1016/j.jallcom.2013.12.151 ↗
6. Effect of surface mechanical attrition treatment (SMAT) on pack boronizing of AISI 304 stainless steel10.1016/j.surfcoat.2013.04.053 ↗
7. Superplastic boronizing of a low alloy steel - microstructural aspects10.1016/S0924-0136(00)00737-8 ↗
8. Boriding of mild steel using the spark plasma sintering (SPS) technique10.1016/S0257-8972(02)00134-2 ↗
9. Influence of direct current field on powder-pack boriding10.4028/www.scientific.net/SSP.118.167 ↗
10. Characteristics and mechanisms of accelerating pack boriding by direct current field at low and moderate temperatures10.1016/j.surfcoat.2011.12.003 ↗
11. Effects of direct current field on powder-packed boriding process on martensitic stainless steel AISI 42010.2478/v10172-012-0087-3 ↗
12. Alternating current field assisted pack boriding to Fe2B coating10.1179/1743294412Y.0000000104 ↗
13. Study on effects of alternating current field to pack boriding of medium carbon steel10.1179/1749514814Z.000000000106 ↗
14. Wuhan materials’ protection research institute · 1980 · 52
15. Characterization of the operative mechanism in potassium fluoborate activated pack boriding of steels10.1016/j.jmatprotec.2004.10.015 ↗
16. Formation of boride layers at the Fe–10%Cr alloy–boron interface10.1016/j.jallcom.2005.02.033 ↗
17. Growth of boride layers on the 13% Cr steel surface in a mixture of amorphous boron and KBF410.1007/s10853-007-1512-2 ↗
18. Enhanced growth of intermetallic phases in the Ni–Ti system by current effects10.1016/S1359-6454(03)00284-2 ↗
19. Intermetallic compounds at aluminum-to-copper electrical interfaces: effect of temperature and electric current10.1109/95.296372 ↗
20. Detection of current-induced vacancies in thin aluminum-copper lines using positrons10.1063/1.116700 ↗
21. КИЛИК · 1962 · 3