Microstructures and nano-mechanical properties of multilayer coatings prepared by plasma nitriding Cr-coated Al alloy
Source abstract
Abstract
Abstract A novel surface treatment combined with depositing Cr films followed by plasma nitriding was carried out on the surface of the 2024 Al alloy. Nano-grained Cr films were firstly deposited on the substrate surface by using magnetron sputtering, then plasma nitrided at 490 °C for 8 h under a gas mixture of 25% N 2 +75% H 2 . Microstructures and mechanical properties of the as-obtained coatings were characterized by using X-ray photoelectron spectrometer (XPS), X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM) and nanoindentation. Results showed that a nitride/aluminide multilayer coating was obtained due to N-Cr and Cr-Al diffusion reaction. The outside nitride layer consisted of mainly CrN with nano crystals. The inner aluminide layer was composed of Al 4 Cr with nano lath-shaped structure and Al 18 Cr 2 Mg 3 with large rectangle crystals. The nitrided surface showed a remarkable increase in hardness (15.4 GPa) than that of the untreated Cr film (5.2 GPa). The high valves of H/E ratio (0.078) and H 3 /E 2 ratio (0.094) indicated the better wear resistance and plastic deformation resistance for the nitride surface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Boron and Carbon Nanomaterials Research · GaN-based semiconductor devices and materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Recent development in aluminium alloys for the automotive industry10.1016/S0921-5093(99)00653-X ↗
2. Recent developments in advanced aircraft aluminium alloys10.1016/j.matdes.2013.12.002 ↗
3. A comparative study on wear behavior of TiN and diamond coated WC-Co substrates against hypereutectic Al-Si alloys10.1016/j.apsusc.2012.08.049 ↗
4. Characterization of titanium chromium nitride nanocomposite protective coatings10.1016/j.apsusc.2004.02.019 ↗
5. Corrosion resistance of CrN and CrCN/CrN coatings deposited using cathodic arc evaporation in Ringer's and Hank's solutions10.1016/j.surfcoat.2016.04.069 ↗
6. Effects of the ratio of anodic and cathodic currents on the characteristics of micro-arc oxidation ceramic coatings on Al alloys10.1016/j.apsusc.2013.12.028 ↗
7. Mono- and multiple TiN(/Ti) coating adhesion mechanism on a Ti-13Nb-13Zr alloy10.1016/j.apsusc.2015.07.126 ↗
8. Fatigue and wear properties of Ti-6Al-4V alloy with Cr/CrN multilayer coating10.1016/j.surfcoat.2015.05.014 ↗
9. Tribological properties of graded diamond-like carbon films on Ti ion-implanted aluminum substrate10.1016/j.diamond.2007.12.025 ↗
10. Deposition of thick TiAlN coatings on 2024 Al/SiCp substrate by Arc ion plating10.1016/j.surfcoat.2008.05.041 ↗
11. Microstructure and corrosion properties of laser surface processed aluminium alloys: a review10.1016/S0921-5093(97)00034-8 ↗
12. Formation of surface layer based on Al3Ti on aluminum by laser cladding and its compatibility with ceramics10.1016/S0966-9795(98)00071-5 ↗
13. Improving the wear resistance of AA 6061 by laser surface alloying with NiTi10.1016/j.matlet.2007.01.016 ↗
14. Microstructure and mechanical properties of multiphase layer formed during depositing Ti film followed by plasma nitriding on 2024 aluminum alloy10.1016/j.apsusc.2014.02.091 ↗
15. Microstructure and mechanical properties of multiphase layer formed during thermo-diffusing of titanium into the surface of C17200 copper-beryllium alloy10.1016/j.apsusc.2013.11.121 ↗
16. Wear resistance of TiN(Ti2N)/Ti composite layer formed on C17200alloy by plasma surface Ti-alloying and nitriding10.1016/j.apsusc.2016.03.059 ↗
17. Development of chromium nitride coatings substituting titanium nitride10.1016/S0257-8972(96)03042-3 ↗
18. Surface hardness prediction of CrN thin film coating on Al 7075-T6 alloy using fuzzy logic system10.1007/s12541-013-0063-5 ↗
19. Structural and tribological properties of CrTiAlN coatings on Mg alloy by closed-field unbalanced magnetron sputtering ion plating10.1016/j.apsusc.2008.05.338 ↗
20. Effect of N2, flow rate on microstructure and mechanical properties of PVD CrNx, coatings for tribological application in seawater10.1016/j.surfcoat.2014.01.021 ↗
21. Influence of titanium or aluminum doping on the electrochemical properties of CrN coatings in artificial seawater10.1016/j.surfcoat.2016.08.036 ↗
22. Friction and wear properties of CrSiCN coatings with low carbon content as sliding against SiC and steel balls in water10.1016/j.triboint.2015.08.032 ↗
23. Surface analysis of electrochemically stripped CrN coatings10.1016/j.surfcoat.2006.08.110 ↗
24. XPS investigations of chromium nitride thin films10.1016/j.surfcoat.2005.02.091 ↗
25. Microstructure of electroplated hard chromium coatings after plasma nitrocarburizing10.1016/j.surfcoat.2004.08.213 ↗
26. Inductively coupled plasma nitriding of chromium electroplated AISI 316L stainless steel for PEMFC bipolar plate10.1016/j.ijhydene.2009.01.004 ↗
27. Repairing the cracks network of hard chromium electroplated layers using plasma nitriding technique10.1016/j.vacuum.2016.02.001 ↗
28. Protection of aluminium by duplex coatings10.1016/0257-8972(95)02556-1 ↗
29. Performance characterization on a novel intermetallic layer produced by interdiffusion between Ti film and 5083 Al alloy10.1016/j.vacuum.2013.12.007 ↗
30. Plasticity characterization of the modified layer produced by plasma nitrocarburizing of nanocrystallized 18Ni maraging steel10.1016/j.vacuum.2011.04.021 ↗
31. Effect of carbon content on structure and properties of WCN coatings prepared by RF magnetron sputtering10.1016/j.surfcoat.2016.01.003 ↗
32. Wear and corrosion resistance of CrN/TiN superlattice coatings deposited by a combined deep oscillation magnetron sputtering and pulsed dc magnetron sputtering10.1016/j.apsusc.2015.05.110 ↗
33. On the significance of the H/E, ratio in wear control: a nanocomposite coating approach to optimised tribological behavior10.1016/S0043-1648(00)00488-9 ↗
34. Elastic-plastic resistance profile of PBII nitrided titanium10.1016/j.scriptamat.2004.06.029 ↗
35. Effect of bias voltage on microstructure and nanomechanical properties of Ti films10.1016/S1003-6326(14)63420-8 ↗
36. Fabrication of a nitrided coating on a novel Ni-Cr nanocomposite with increased surface hardness10.1016/j.materresbull.2009.12.015 ↗
37. Effect of plasma nitriding on electrodeposited Ni-Al composite coating10.1016/j.matdes.2010.07.007 ↗