journal article·2017-07

Influence of beam current on microstructures and mechanical properties of electron beam welding-brazed aluminum-steel joints with an Al5Si filler wire

Ting Wang, Yongyun Zhang, Xiaopeng Li, Binggang Zhang, Jicai Feng

Vacuum· Volume 141
Publisher page

Abstract

Abstract Exploratory experiments of Electron beam welding-brazing (EBW-brazing) of 304 stainless steel (304 SS) to commercial pure aluminum (CP-Al) with an Al5Si filler wire under different beam currents were carried out. The microstructural characteristics of the joints were analyzed by SEM and XRD methods. Tensile strengths and nanoindentation were performed to evaluate the mechanical properties of the joints. The results indicated that beam current affected the thickness of the IMC layer and weld appearances, then further affected the tensile strengths of joints. The major intermetallic compound (IMC) formed at the connection layer was determined to be Al 8 Fe 2 Si with a Young's modulus of 223.2 GPa and nanohardness of 9.5 GPa. The highest tensile strength of the joints was 93 MPa under an optimum welding parameter, which was approximately equal to 83% of that of CP-Al.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Electron beam welding of 304 stainless steel to QCr0.8 copper alloy with copper filler wire10.1016/S1003-6326(14)63569-X ↗
2. Oxygen-induced nickel segregation in nitrogen plasma implanted AISI 304 stainless steel10.1016/S0921-5093(01)01245-X ↗
3. Welding of thick stainless steel plates up to 50 mm with high brightness lasers
4. Recent development in aluminum alloys for aerospace applications10.1016/S0921-5093(99)00674-7 ↗
5. Carbon nanotube-reinforced aluminum strips10.1016/j.compscitech.2007.06.030 ↗
6. Spreading behavior and microstructure characteristics of dissimilar metals TIG welding–brazing of aluminum alloy to stainless steel10.1016/j.msea.2009.02.036 ↗
7. Intermetallic compounds in Al 6016/IF-steel friction stir spot welds10.1016/j.msea.2010.03.097 ↗
8. Control of intermetallic compound layers at interface between steel and aluminum by diffusion-treatment10.1016/S0921-5093(02)00053-9 ↗
9. Interfacial reaction in steel–aluminum joints made by friction stir welding10.1016/j.scriptamat.2006.04.028 ↗
10. Comprehensive analysis of joint strength for dissimilar friction stir welds of mild steel to aluminum alloys10.1016/j.scriptamat.2009.06.022 ↗
11. Resistance spot welding of aluminum and steel: a comparative experimental study
12. On the formation and growth of intermetallic phases during interdiffusion between low-carbon steel and aluminum alloys10.1016/j.actamat.2010.11.023 ↗
13. Investigation of bonding strength and sealing behavior of aluminum/stainless steel bonded at room temperature10.1016/j.vacuum.2010.02.014 ↗
14. Vacuum brazing technology and microstructure near the interface of Al/18-8 stainless steel
15. Galvanised steel to aluminium joining by laser and GTAW processes10.1016/j.matchar.2008.03.016 ↗
16. Interfacial microstructure of a6111/steel lap joint fabricated by defocused laser beam welding10.4028/www.scientific.net/MSF.519-521.1119 ↗
17. Dissimilar metal joining of aluminum to steel by MIG arc brazing using flux cored wire10.2355/isijinternational.43.1596 ↗
18. Interfacial phenomena of cold metal transfer (CMT) welding of zinc coated steel and wrought aluminium10.1179/174328407X213152 ↗
19. Electron beam welding – techniques and trends – review10.1016/j.vacuum.2016.05.004 ↗
20. Influence of focusing thermal effect upon AZ91D magnesium alloy weld during vacuum electron beam welding10.1016/j.vacuum.2011.11.011 ↗
21. The state of the art in the electron beam manufacturing processes10.1007/s12541-016-0184-8 ↗
22. The application of electron beam welding for the joining of dissimilar metals: an overview10.1016/0924-0136(95)02150-7 ↗
23. Strength and structure of furnace-brazed joints between aluminum and stainless steel
24. Enhancement of the laser welded AA6061-carbon steel joints by using Al5Si intermediate layer10.1016/j.jmatprotec.2016.06.017 ↗
25. Effects of metal-vapor jet force on the physical behavior of melting wire transfer in electron beam additive manufacturing10.1016/j.jmatprotec.2015.01.024 ↗
26. CO2 laser welding–brazing characteristics of dissimilar metals AZ31B Mg alloy to Zn coated dual phase steel with Mg based filler10.1016/j.jmatprotec.2012.10.009 ↗
27. Intermetallic FexAly-phases in a steel/Al-alloy fusion weld10.1007/s10853-006-0644-0 ↗
28. Reduction of porosity content generated during Nd:YAG laser welding of A356 and AA5083 aluminium alloys10.1016/S0921-5093(03)00637-3 ↗
29. Investigation of transport phenomena and defect formation in pulsed laser keyhole welding of zinc-coated steels10.1088/0022-3727/39/24/036 ↗
30. Load partitioning in aluminum syntactic foams containing ceramic microspheres10.1016/j.actamat.2005.11.017 ↗