journal article·2014-12

High-efficient surface modification of thin austenitic stainless steel sheets applying short-time plasma nitriding by means of strip hollow cathode method for plasma thermochemical treatment

K. Nikolov, K. Bunk, A. Jung, P. Kaestner, G. Bräuer, C.-P. Klages

Vacuum· Volume 110
Publisher page

Abstract

Abstract The present work is devoted to the short-time plasma nitriding of EN 1.4301 (AISI 304) austenitic stainless steel sheets in a pulsed glow discharge by means of a novel strip hollow cathode process for plasma thermochemical treatment (SHC-PTT) aiming at their use as bipolar plates of proton exchange membrane fuel cells (PEMFC). The fundamental trends in the change of the interfacial contact resistance (ICR) and corrosion resistance in dependence on the duration of plasma nitriding were studied. The investigations were focused on the capability of the method to reduce the ICR without deterioration of the corrosion resistance in a high-rate process. Within the range of experiments it could be shown that at a certain temperature, defined by improved or at least non-deteriorated corrosion resistance, the plasma nitriding rate is determined by the requested value of ICR. The simultaneously reduced ICR and improved corrosion resistance are explained by the formation of chromium nitrides on the substrate surfaces during the plasma nitriding. Acceptable ICR and corrosion resistance could be achieved in a continuous non-isothermal plasma nitriding process at a simulated strip rate up to 23 m h −1 with further potential to speed up the process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Semiconductor materials and devices · Ion-surface interactions and analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Strip hollow cathode for plasma thermochemical treatment for surface modification of thin metal strips: plasma nitriding of austenitic stainless steel sheets for bipolar plates10.1016/j.vacuum.2013.11.001 ↗
2. High-density plasma nitriding of AISI 316L for bipolar plate in proton exchange membrane fuel cell10.1016/j.ijhydene.2010.11.077 ↗
3. 2014
4. Corrosion of metal bipolar plates for PEM fuel cells: a review10.1016/j.ijhydene.2010.01.059 ↗
5. Rapid plasma nitriding process by means of hollow cathode glow discharge
6. Ion nitriding in glow discharge with hollow cathode effect10.1007/s11041-007-0065-y ↗
7. Thermochemische Randschichtbehandlung nichtrostender Stähle bei tiefen Temperaturen10.3139/105.110044 ↗
8. Babad-Zahriapin · 1975
9. Structure of the ion-nitrided layer of 18-8 stainless steel
10. S-phase surface engineering of Fe–Cr, Co–Cr and Ni–Cr alloys10.1179/095066009X12572530170589 ↗
11. Plasma-nitrided austenitic stainless steel 316L as bipolar plate for PEMFC10.1016/j.ijhydene.2006.03.003 ↗
12. Surface modification of AISI 304 austenitic stainless steel by plasma nitriding10.1016/S0169-4332(03)00260-5 ↗
13. The electrical properties of chromium borides, carbides, and nitrides10.1007/BF00774426 ↗
14. Passive films on stainless steels-chemistry, structure and growth10.1016/S0013-4686(02)00841-1 ↗
15. Graph theory and the passivity of binary alloys10.1016/S0010-938X(00)00038-X ↗
16. Bipolar plate materials for solid polymer fuel cells10.1023/A:1003831406406 ↗
17. Stainless steel as bipolar plate material for polymer electrolyte membrane fuel cells10.1016/S0378-7753(03)00023-5 ↗
18. Microstructure, corrosion and tribological behavior of plasma immersion ion-implanted austenitic stainless steel10.1016/0257-8972(93)90094-5 ↗
19. 2013
20. Characterization of nitride coatings by XPS10.1016/S0257-8972(01)01619-X ↗
21. XPS investigations of chromium nitride thin films10.1016/j.surfcoat.2005.02.091 ↗
22. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and Ni10.1016/j.apsusc.2010.10.051 ↗
23. Surface properties of nitrided layer on AISI 316L austenitic stainless steel produced by high temperature plasma nitriding in short time10.1016/j.apsusc.2014.01.177 ↗
24. Chemical bonding of nitrogen in low energy high flux implanted austenitic stainless steel10.1063/1.1469691 ↗
25. Nitrogen interstitial diffusion induced decomposition in AISI 304L austenitic stainless steel10.1016/j.actamat.2012.04.014 ↗