journal article·2019-01

Tungsten carbide phase transformation under non-equilibrium solidification of high intensity pulsed ion and electron beams

Zhang Fenggang

Vacuum· Volume 159
Publisher page

Abstract

Abstract The WC-13Ni cemented carbides irradiated by high-intensity pulsed ion beam (HIPIB, 300 keV, 2–6 J/cm2, 70 ns) and high-intensity pulsed electron beam (HIPEB, 127 keV, 3–34 J/cm2, 180 ns) have been investigated by using scanning electron microscopy, surface profilometer and X-ray diffraction in order to explore the mechanisms of phase transformation. It was found that in both cases beams irradiation with higher energy density resulted in obvious surface remelting and phase transformation from WC to WC1-x, expect that W2C was also found for HIPEB-irradiated samples. However, surface morphology differed greatly in the two cases, HIPIB irradiation induced significant selective ablation of nickel binder, forming a wavy surface of “hill-valley” topography, whereas HIPEB irradiation caused notable surface melting but with less selective ablation, forming a flatter surface with occurrence of apparent cracks and blow holes. The formation of WC1-x phase during the process of beams irradiation should be attributed to the reaction ablation of carbon in the WC and the eutectic reaction at ∼2995 K, while the formation of W2C phase was resulted from the eutectic reaction at ∼2925 K and WC1-x decomposition during the more longer melting process of HIPEB irradiation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · Pulsed Power Technology Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Friction and wear characteristics of WC-Co cemented carbides in dry reciprocating sliding contact10.1016/j.wear.2010.02.029 ↗
2. Adhesive wear performance of hardmetals and cermets10.1016/j.wear.2010.01.006 ↗
3. Dry reciprocating sliding friction and wear response of WC-Ni cemented carbides10.1007/s11249-008-9352-z ↗
4. Pulsed electron-beam treatment of WC-TiC-Co hard alloy cutting tools: wear resistance and microstructural evolution10.1016/S0257-8972(99)00569-1 ↗
5. Formation of hardened layer in WC-TiC-Co alloy by treatment of high intensity pulse ion beam and compression plasma10.1016/j.surfcoat.2009.09.039 ↗
6. Wear phenomena on WC-based face seal rings10.1016/S0263-4368(00)00011-1 ↗
7. The influence of PH on sliding wear of WC based materials10.1016/S0263-4368(00)00007-X ↗
8. The relationship between electrochemical behavior and in-service corrosion of WC based cemented carbides10.1016/S0263-4368(96)00014-5 ↗
9. Surface modification of hard alloy by Y ion implantation under different atmosphere10.1016/j.apsusc.2011.01.113 ↗
10. The effect of pulsed electron beam melting on microstructure, friction and wear of WC-Hardfiled steel hard metal10.1016/j.wear.2003.10.011 ↗
11. Surface microstructure and mechanical property of WC-6%Co hard alloy irradiated by high current pulsed electron beam10.1016/j.apsusc.2013.04.053 ↗
12. WC-Co cutting tool surface modifications induced by pulsed laser treatment10.1016/S0169-4332(98)00607-2 ↗
13. Surface softening and hardening of WC-Co using pulsed laser irradiation10.1016/j.surfcoat.2005.11.126 ↗
14. Structure, phase composition and mechanical properties of hard alloy treated by intense pulsed electron beams10.1016/j.surfcoat.2011.12.032 ↗
15. Surface characterization and tribological properties of WC-Ni cemented carbides irradiated by high intensity pulsed electron beam10.1016/j.vacuum.2016.12.032 ↗
16. Escape of carbon element in surface ablation of cobalt cemented tungsten carbide with pulsed UV laser10.1016/S0169-4332(00)00829-1 ↗
17. Characterization of a high-intensity unipolar-mode pulsed ion source with improved magnetically insulated diode10.1063/1.1529303 ↗
18. Characterization of a high-intensity bipolar-mode pulsed ion source for surface modification of materials10.1063/1.1455137 ↗
19. Study of low impedance intense electron-beam accelerator based on magnetic core Tesla transformer10.1017/S0263034612000110 ↗
20. A compact high power pulsed modulator based on spiral blumlein line10.1063/1.2800751 ↗
21. Crater formation on the surface of titanium irradiated by a high-intensity pulsed ion source10.1016/S0257-8972(03)00321-9 ↗
22. Microstructural evolution and its correlation with hardening of WC-Ni cemented carbides irradiated by high-intensity pulsed ion source10.1016/j.surfcoat.2012.04.011 ↗
23. Physical foundation for surface modification of materials with lower energy, high current electron beams10.1016/S0257-8972(99)00604-0 ↗
24. Pulsed-ion-beam nitriding and smoothing of titanium surface in a vacuum10.1063/1.2035876 ↗
25. Ziegler · 2008
26. Schiller · 1982
27. Pulsed electron-beam technology for surface modification of metallic materials10.1116/1.581369 ↗
28. Simulation of surface temperature of metals irradiated by intense pulsed electron, ion and laser beams10.1016/S0257-8972(03)00083-5 ↗
29. Ordering in the carbide W2C and phase equilibria in the tungsten-carbon system in the region of its existence10.1007/s11106-005-0032-3 ↗
30. A study of high velocity oxy-fuel thermally thermally sprayed tungsten carbides based coatings. Part 1: microstructures10.1016/S0921-5093(97)00759-4 ↗
31. Modification of WC hard alloy by compressive plasma flow10.1016/j.surfcoat.2005.02.079 ↗
32. Kinetic modeling of phase selection during non-equilibrium solidification of a tungsten-carbon system10.1016/S1359-6454(01)00447-5 ↗