journal article·2018-01

Formation mechanism of sealing edge pores for vacuum glazing using laser brazing technique

Jianfeng Zhang, Sixing Liu, Yanjun Zhang, Hong Miao, Shanwen Zhang, Qi Zhang

Vacuum· Volume 147
Publisher page

Abstract

Abstract In view of the pore defect of vacuum glazing sealing layer, the research on side edge sealing of laser was made. The phase analysis of microstructure on sealing layer was investigated using scanning electron microscope (SEM) and energy spectrum analysis (EDS) to study the formation mechanism of sealing pores. The influence of laser power and welding rate on sealing edge porosity was researched. The results show that the sealing layer has evenly distributed bilayer structure of wetting layer with few pores caused by the residual gases between the solder particles (external) –melting layer with a large number of mutually disconnected isolated pores (inside). As the increase of laser power, the interface layer is compact and smooth and the pores decline in numbers. When the power exceeds a certain value, the interface becomes unsmooth with the increasing number of pores. The phenomenon of surface defects and blocky structures is generated with lower welding speed and greater energy output. On the other hand, the blocky structures, unmelted solders, pores and cracks are formed by the higher welding speed and smaller energy output. Therefore, the pore defect can be effectively avoided and reduced by the reasonable control of laser power and welding rate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Laser Material Processing Techniques · Glass properties and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Indium alloy-sealed vacuum glazing development and context10.1016/j.rser.2014.05.029 ↗
2. Sealing performance and chemical compatibility of SrO–La2O3–Al2O3–SiO2 glasses with bare and coated ferritic alloy10.1016/j.ceramint.2016.06.040 ↗
3. Thermal conductance measurement on vacuum glazing10.1016/j.ijheatmasstransfer.2006.05.032 ↗
4. Establishment of regression model for estimating shape parameters for vacuum-sealed glass panel using design of experiments10.1016/j.vacuum.2015.08.007 ↗
5. Effect of sealing temperature on the sealing edge performance of vacuum glazing10.1016/j.vacuum.2015.02.009 ↗
6. Development of laser beam welding for the lip seal configuration10.1016/j.fusengdes.2015.05.064 ↗
7. Numerical simulation of the laser welding process in butt-joint specimens10.1016/S0924-0136(02)00921-4 ↗
8. Prediction of laser welding quality by computational intelligence approaches10.1016/j.ijleo.2017.04.088 ↗
9. Laser welding of fused silica glass with sapphire using a non- stoichiometric, fresnoitic Ba2TiSi2O8•3SiO2, thin film as an absorber10.1016/j.optlastec.2017.01.010 ↗
10. A glass in the CaO/MgO/Al2O3/SiO2, System for the rapid laser sealing of alumina10.1016/j.ceramint.2016.12.073 ↗
11. Investigation of the melting characteristic, forming regularity and thermal behavior in lead-free V2O5–B2O3–TeO2 low temperature sealing glass10.1016/j.matlet.2011.09.037 ↗
12. Novel alkaline earth silicate sealing glass for SOFC: Part II. Sealing and interfacial microstructure10.1016/j.jpowsour.2007.03.060 ↗
13. Composite waste form based on SiO2–PbO–CaO–ZrO2–TiO2– (B2O3–K2O) parent glass with zircon as the second component10.1016/j.ceramint.2008.08.019 ↗
14. Effects of GeO2 on structure and properties of PbO-B2O3-ZnO glass
15. Properties of Bi2O3-BaO-SiO2-RxOy for sealing
16. Laser glass frit sealing for encapsulation of vacuum insulation glasses10.1016/j.phpro.2014.08.075 ↗
17. Anodic bonding of activated tin solder alloys in the liquid state: a novel large-area hermetic glass sealing method10.1016/j.solmat.2011.06.012 ↗
18. Investigation on edge joints of Inconel 625 sheets processed with laser welding10.1016/j.optlastec.2017.03.011 ↗
19. Sensitivity analysis of edge sealing process parameters of vacuum glazing panel10.1080/15421406.2013.852770 ↗