Structure, mechanical and tribological characterisations of pulsed DC magnetron sputtered TiN-WS x composite coating
Source abstract
Abstract
Abstract Pulsed DC magnetron sputtered TiN-WS x composite coatings were investigated in terms of their structural, mechanical and tribological properties. The coatings were synthesized in Ar and N 2 mixed environment from separate Ti and WS 2 targets. Compositional variation was performed by systematically varying the Ti cathode current while keeping the same for WS 2 cathode at a fixed value. EDS analysis of the films revealed that the cumulative (W + S) content varied from 8.9 to 42.0 wt%. The films were, however, sulphur deficient, S/W at.% ratio being in the range of 0.6–0.78. GIXRD spectra indicated coexistence of (002) oriented WS 2 phase along with polycrystalline TiN phase, as confirmed by HRTEM revealing presence of WS 2 in nanocluster form within TiN columnar structure. FESEM micrographs showed decrease in agglomerated grain size and densification of columnar structure with increase in (W + S) content. The adhesion also scaled with (W + S) content up to 27.8 wt%. The nanohardness of the composite coatings, however, progressively decreased from 27.3 GPa to 17.3 GPa with increasing content of (W + S). Significant reduction in friction coefficient and wear rate could also be recorded for the composite coatings, as compared to TiN, the best being obtained for the one containing 15.0 wt% of (W + S).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Brainard · 1969
2. Molybdenum disulfide as a lubricant: a review of the fundamental knowledge10.1016/0043-1648(67)90187-1 ↗
3. Coating characteristics and tribological properties of sputter-deposited MoS2 metal composite coatings deposited by closed field unbalanced magnetron sputter ion plating10.1016/S0257-8972(00)00538-7 ↗
4. Structural, mechanical and tribological properties of WS2-Ti composite coating with and without hard under layer of TiN10.1016/j.surfcoat.2014.07.072 ↗
5. Effect of Ag content on microstructure and tribological performance of WS2–Ag composite films10.1016/j.surfcoat.2006.02.039 ↗
6. Nanostructured WS2–Ni composite films for improved oxidation, resistance and tribological performance10.1016/j.apsusc.2013.09.024 ↗
7. MoSx-Ta composite coatings on steel by d.c magnetron sputtering10.1016/j.vacuum.2012.05.013 ↗
8. On the microstructure of tungsten disulfide films alloyed with carbon and nitrogen10.1016/j.tsf.2005.02.018 ↗
9. The tribological behavior of W–S–C films in pin-on-disk testing at elevated temperature10.1016/j.vacuum.2007.04.010 ↗
10. Ultra-low friction W–S–N solid lubricant coating10.1016/j.surfcoat.2013.06.026 ↗
11. Structural, mechanical and tribological properties of pulsed DC magnetron sputtered TiN–WSx/TiN bilayer coating10.1016/j.surfcoat.2015.10.011 ↗
12. Influence of Ti addition on the structure and properties of low-friction W–S–C coatings10.1016/j.surfcoat.2013.05.032 ↗
13. Complex frictional analysis of self-lubricant W-S-C/Cr coating10.1039/c2fd00003b ↗
14. The deposition of low-friction TiN–MoSx hard coatings by a combined arc evaporation and magnetron sputter process10.1016/S0257-8972(99)00466-1 ↗
15. Composition and structure–property relationship of low friction, wear resistant TiN–MoSx composite coating deposited by pulsed closed-field unbalanced magnetron sputtering10.1016/j.surfcoat.2008.11.004 ↗
16. Unbalanced magnetron sputtered Ti–Si–N: MoSx composite coatings for improvement of tribological properties10.1016/j.surfcoat.2004.10.053 ↗
17. Deposition of CrN–MoS2 thin films by D.C. magnetron sputtering10.1016/j.surfcoat.2004.08.013 ↗
18. Deposition of magnetron sputtered TiN+MoSx coating with Ti–TiN graded interlayer10.1016/j.surfcoat.2005.02.096 ↗
19. Structure, composition and mechanical characterization of dc sputtered TiN-MoS2 nanocomposite thin films10.1016/j.surfcoat.2011.01.044 ↗
20. Solid lubricant coatings for high temperatures – a review10.1016/0301-679X(82)90089-5 ↗
21. Structural, mechanical and tribological investigations of sputter deposited CrN–WS2 nanocomposite solid lubricant coatings10.1016/j.triboint.2011.07.007 ↗
22. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
23. Preparation and characterisation of low-friction TiB2-based coatings by incorporation of C or MoS210.1016/S0257-8972(98)00445-9 ↗
24. Mechanisms for compositional variations of coatings sputtered from a WS2 target10.1016/j.surfcoat.2014.04.066 ↗
25. Structure and tribological properties of MoSx coatings prepared by bipolar DC magnetron sputtering10.1016/S0257-8972(01)00988-4 ↗
26. Humidity resistant MoSx films prepared by pulsed magnetron sputtering10.1016/S0257-8972(00)00796-9 ↗
27. Control of molybdenum disulfide basal plane orientation during coating growth in pulsed magnetron sputtering discharges10.1016/j.tsf.2009.01.190 ↗
28. Crystallography of magnetron sputtered TiN coatings on steel substrates10.1016/j.vacuum.2006.09.018 ↗
29. Influence of thickness on the crystallography and surface topography of TiN nano-films deposited by reactive DC and pulsed magnetron sputtering10.1016/j.tsf.2012.03.097 ↗
30. Growth, structure and friction behavior of titanium doped tungsten disulphide (Ti-WS2) nanocomposite thin films10.1016/j.tsf.2009.02.103 ↗
31. Effect of target frequency, bias voltage and bias frequency on microstructure and mechanical properties of pulsed DC CFUBM sputtered TiN coating10.1016/j.surfcoat.2010.04.047 ↗
32. Low-friction TiN–MoS2 coatings produced by dc magnetron co-deposition10.1016/S0257-8972(98)00602-1 ↗
33. Composition, structure, microhardness and residual stress of W–Ti–N films deposited by reactive magnetron sputtering10.1016/S0040-6090(02)00091-3 ↗
34. Chemical and physical characterization of C(N)-doped W–S sputtered films10.1557/JMR.2004.0293 ↗
35. Characterisation of r.f. sputtered tungsten disulfide and oxysulfide thin films10.1016/S0040-6090(02)00717-4 ↗
36. Failure modes in scratch adhesion testing10.1016/0257-8972(91)90188-3 ↗
37. Composition and structure-property relationships of chromium-diboride/molybdenum-disulphide PVD nanocomposite hard coatings deposited by pulsed magnetron sputtering10.1007/s00339-007-4362-5 ↗
38. Deposition and characterization of hard-solid lubricant coating by closed-field magnetron sputtering10.1016/j.surfcoat.2005.02.058 ↗
39. The oxidation behaviour and tribological properties of Si-implanted TiN coating10.1016/j.vacuum.2013.06.006 ↗
40. Structure, mechanical and tribological properties of self-lubricant W–S–N coatings10.1016/j.surfcoat.2014.11.074 ↗