Structure and wear resistance of the composite layers produced by glow discharge nitriding and PLD method on AISI 316L austenitic stainless steel
Source abstract
Abstract
Abstract The rapid technical development enhances the demands on constructional materials in terms of their resistance to frictional wear, resistance to corrosion and erosion, high hardness, high tensile and fatigue strength. These demands can be satisfied by e.g. applying various surface engineering techniques that permit to modify the microstructure, phase and chemical composition of the surface layers of the treated parts. A prospective line of the development of surface engineering is the production of composite layers by combining various surface engineering methods. The paper presents the results of examinations of the phase composition and frictional wear resistance of the layers produced by hybrid processes, i.e. such that combined glow discharge assisted nitriding performed at 450 °C and 550 °C with a pulsed laser deposition of boron nitride coatings (PLD method). It has been shown that the boron nitride coatings formed on nitrided AISI 316L steel increase its frictional wear resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (8)
Show source-provided references
1. The response of austenitic stainless steel to low-temperature plasma nitriding
2. Glow discharge nitriding of AISI 316L austenitic stainless steel: influence of treatment temperature10.1016/j.surfcoat.2004.07.110 ↗
3. Trojanowski J, Nakonieczny A, Wierzchon T. Low temperature nitriding of austenitic stainless steels under glow discharge conditions. In: Proc. SAE Inter, Off-Highway Congress, Las Vegas, USA; 2002. p. 1–5.10.4271/2002-01-1365 ↗
4. Review of advances in cubic born nitride film synthesis10.1016/S0927-796X(97)00009-0 ↗
5. Burakowski · 1999
6. BN-based nano-composites produced by laser ablation
7. Phase formation and microstructure of boron nitride thin layers deposited using Ng:YAG and KrF lasers10.1016/j.surfcoat.2005.11.095 ↗
8. Sobiecki JR, Borowski T, Matysiak H, Kurzydlowski KJ, Wierzchon T. Increase of durability of stainless steel using the glow discharge treatment. In: Proc. of 2nd. Inter. Conf. Heat Treat. and Surf. Eng. in automotive applications, Riva del Garda, Italy; 2005. CD-Rom.