journal article·2019-04

Effect of CrSi/CrSi2 content on the microstructure and properties of vacuum hot-pressed Cr-50 wt% Si alloys

Shih-Hsien Chang, Sung-Shiuan Lin, Kuo-Tsung Huang

Vacuum· Volume 162
Publisher page

Abstract

Abstract In this work, the micron-structured chromium and silicon powders were mixed to fabricate Cr-50 wt% Si alloys by the vacuum hot pressing technique. The research utilized various hot pressing temperatures (1150, 1200, 1250 and 1300 °C) and hot-press pressures (20, 30, 40 and 50 MPa) to find the optimal parameters for Cr-50 wt% Si alloys, simultaneously investigating the differences in microstructures and characteristics. The experimental results showed that the optimal hot pressing parameters of this study were 1250 °C at 40 MPa for 1 h. Meanwhile, Cr-50 wt% Si alloys possessed the optimal mechanical and electrical properties. Among them, the sintering density reached to 4.84 ± 0.1 g cm−3, and the hardness, TRS, and KIC increased to 87.7 ± 0.4 HR30N, 261.35 ± 9.7 MPa and 4.59 ± 0.1 MPa m1/2, respectively, while the electrical conductivity was 1.94 ± 0.1 × 105 S m−1. Consequently, it is reasonable to conclude that effectively enhancing the sintering behavior and improving the mechanical properties of Cr-50 wt% Si alloys at a relatively low sintering temperature using the hot pressing technique was realized.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Oxidation and nitridation behavior of Cr-Si alloys in air at 1473 K10.1007/s11085-015-9544-5 ↗
2. Investigation of vacuum hot pressing temperatures on the sintered characteristics of Cr-31.2 mass% Ti alloys10.2320/matertrans.M2017048 ↗
3. Cr50Cu50 alloys produced from submicrometre structured powders through hot pressing at different pressures10.1080/00325899.2015.1132033 ↗
4. Investigation of the characteristics of submicron-structured powder-fabricated Cr50Ni50 alloys via different hot pressing pressures10.2320/matertrans.M2015400 ↗
5. Improvement of reliability for high-ohmic Cr-Si thin film resistors in a heat and humid environment: removing moisture source byelectrocatalytic decomposition of water10.1016/j.microrel.2016.03.010 ↗
6. Effects of HIP treatment on the microstructure of Cr50-Si50 target10.2320/matertrans.MER2007166 ↗
7. Effects of metal Ni with catalytic activity on magnetron sputtered Cr-Si resistive film in a heat and humid environment10.1016/j.surfcoat.2010.10.018 ↗
8. Effects of the temperature of hot isostatic pressing treatment on Cr-Si targets10.1016/j.ceramint.2008.01.009 ↗
9. The influence of canning HIP treatment on the microstructure characters of Cr35-Si65 and Cr50-Si50 targets10.2320/matertrans.MER2008362 ↗
10. Effects of HIP treatment on the microstructure and properties of Cr35-Si65 target10.2320/matertrans.MER2008259 ↗
11. Interdiffusion processes at irradiated Cr/Si interfaces10.1016/j.jallcom.2014.11.121 ↗
12. A new TiB2 + CrSi2 composite-densification, characterization and oxidation studies10.1016/j.ijrmhm.2010.02.012 ↗
13. Crystallization and transport properties of amorphous Cr-Si thin film thermoelectrics10.1007/s11664-014-3101-x ↗
14. Investigation into the sintered behavior and properties of nanostructured WC-Co-Ni-Fe hard metal alloys10.1016/j.msea.2014.03.096 ↗
15. Study on the sintered characteristics and properties of nanostructured WC-15 wt% (Fe-Ni-Co) and WC-15 wt% Co hard metal alloys10.1016/j.jallcom.2015.07.119 ↗
16. A mathematical approach to Ostwald Ripening due to diffusion and deformation in liquid bridge10.2298/SOS1303261R ↗
17. Microstructures, mechanical properties and corrosion behaviors of NbC added to Vanadis 4 tool steel via vacuum sintering and heat treatments10.1016/j.vacuum.2017.05.015 ↗
18. De Jonghe · 2003 · 187
19. Effect of process parameters on the microstructure and mechanical properties of vacuum hot-press sintered Co-50 mass% Cr alloys10.1080/00325899.2018.1495884 ↗
20. Effects of Nb substitution on thermoelectric properties of CrSi210.1016/j.jallcom.2016.06.047 ↗
21. Structural, thermal, and electrical properties of CrSi210.1063/1.2917347 ↗