Formation and performances of spinel reaction layers on Co-40Mn coatings under an oxygen pressure of 10 5 Pa for solid oxide fuel cell interconnect application
Source abstract
Abstract
Abstract Because of good high temperature conductivity (Mn,Co)3O4 is a promising oxide coating for solid oxide fuel cell interconnect. High-temperature oxidation of Co-Mn alloys at 750 °C and 850 °C at 105 Pa oxygen reveals that formation of a continuous (Co,Mn)3O4 spinel layer significantly decreases oxidation rate constant but not the same for the discontinuous spinel layer. Co-40Mn fine grain alloy coatings are prepared by high-energy micro-arc alloying process (HEMAA). Microstructures and compositions after preparation and oxidation were analyzed by X-ray diffraction (XRD) and scanning electron microscopy (SEM). When pre-oxidized under an oxygen pressure of 105 Pa at 850 °C for 10 h, Co-40Mn coatings are transformed into the external oxide which is mainly composed of (Co,Mn)3O4 and Mn3O4. The results disclose Cr outward transport from the stainless steel is significantly suppressed by the as-prepared (Co,Mn)3O4 oxide coatings, when coatings oxidized at 800 °C for 100 h in wet air. The composited spinel coatings have excellent high temperature oxidation resistance and electrical performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advancements in Solid Oxide Fuel Cells · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Electrodeposition and isothermal aging of Co and Mn layers on stainless steel for interconnectors: initial stages of spinel phase formation10.1016/j.jpowsour.2014.01.028 ↗
2. Application of samaria doped sculptured ceria/La1-xSrxCo1-yFeyO3-δ in cathode of SOFCs at intermediate temperature10.1016/j.vacuum.2013.07.031 ↗
3. Sputtered Ni coating on ferritic stainless steel for solid oxide fuel cell interconnect application10.1016/j.ijhydene.2011.03.160 ↗
4. Mn1.5Co1.5O4 protective coating on Crofer22APU produced by thermal co-evaporation for SOFCs10.1016/j.matlet.2012.12.079 ↗
5. Chemical interaction between Crofer 22 APU and mica-based gaskets under simulated SOFC conditions10.1007/s10853-006-1355-2 ↗
6. Preparation and characterization of La0.9Sr0.1Ga0.8Mg0.2O3 thin film electrolyte deposited by RF magnetron sputtering on the porous anode support for IT-SOFC10.1016/j.vacuum.2011.11.002 ↗
7. Formation of spinel reaction layers in manganese cobaltite e coated Crofer22 APU for solid oxide fuel cell interconnects10.1016/j.jpowsour.2012.07.091 ↗
8. Structure sensitivity of propene oxidation over Co-Mn spinels10.1016/j.proci.2012.06.182 ↗
9. Effect of Mn–Co spinel coating for Fe–Cr ferritic alloys ZMG232L and 232J3 for solid oxide fuel cell interconnects on oxidation behavior and Cr-evaporation10.1016/j.jpowsour.2010.11.078 ↗
10. Effect of pre-oxidation on the oxidation resistance of spinel-coated Fe-Cr ferritic alloy for solid oxide fuel cell applications10.1016/j.jpowsour.2013.08.074 ↗
11. Preparation and performances of Co-Mn spinel coating on a ferritic stainless steel interconnect material for solid oxide fuel cell application10.1016/j.jpowsour.2013.12.007 ↗
12. La0.8Sr0.2MnO3 and (Mn1.5Co1.5)O4 double layer coated by electrophoretic deposition on Crofer22 APU for SOEC interconnect applications10.1016/j.ijhydene.2008.12.005 ↗
13. Baker A. Studies on elements diffusion of Mn/Co coated ferritic stainless steel for solid oxide fuel cell interconnects application10.1016/j.ijhydene.2013.02.026 ↗
14. Oxidation of a ZrB2 coating fabricated on Ta-W alloy by electrophoretic deposition and laser melting10.1016/j.matlet.2015.02.075 ↗
15. Microstructure and cavitation erosion characteristics of Al-Si alloy coating prepared by electrospark deposition10.1016/j.surfcoat.2008.05.013 ↗
16. Development of a nanostructure microstructure in the Al-Ni system using the electrospark deposition process10.1016/j.jmatprotec.2010.02.001 ↗
17. Formation of nanostructured weldments in the Al-Si system using electrospark welding10.1016/j.apsusc.2010.01.068 ↗
18. Oxidation characterization of FeAl coated 316 stainless steel interconnects by high-energy micro-arc alloying technique for SOFC10.1016/j.matlet.2011.06.032 ↗
19. FeAl-based coatings deposited by high-energy micro-arc alloying process for wet-seal areas of molten carbonate fuel cell10.1016/j.jpowsour.2012.06.054 ↗
20. Corrosion protection of 304 stainless steel bipolar plates using TiC films produced by high-energy micro-arc alloying process10.1016/j.jpowsour.2007.06.075 ↗
21. LaCrO3-based coatings deposited by high-energy micro-arc alloying process on a ferritic stainless steel interconnect material10.1016/j.jpowsour.2010.01.023 ↗
22. Oxidation behavior and electrical property of ferritic stainless steel interconnects with a Cr–La alloying layer by high-energy micro-arc alloying process10.1016/j.jpowsour.2010.06.016 ↗
23. Oxidation behavior of (Co,Mn)3O4 coatings on preoxidized stainless steel for solid oxide fuel cell interconnects10.1016/j.ijhydene.2011.09.028 ↗
24. Synergism in the design of interconnect alloy-coating combinations solid for oxide fuel cells10.1016/j.scriptamat.2010.09.020 ↗
25. On the formation of interfacial and internal voids in alpha-Al2O3 scales10.1007/BF01670505 ↗
26. Preparation and high temperature performances of DyCrO3-based coatings on a ferritic stainless steel interconnect material10.1016/j.jpowsour.2013.01.192 ↗
27. High temperature oxidation of Co-Mn alloys
28. Oxidation properties of Co-Mn alloys at temperatures from 1273 to 1473 k10.1007/BF00659271 ↗
29. Improvement in properties: additives in oxidation resistance10.1098/rsta.1980.0124 ↗