journal article·2012-05

Gas dynamics modelling for particle accelerators

Oleg B. Malyshev

Vacuum· Volume 86· Issue 11
Publisher page

Abstract

Abstract Design of an accelerator vacuum chamber requires an input from different scientific disciplines such as surface science, material science, gas dynamics, particle beam dynamics, and many others. Although vacuum scientists work on the boundary field between these disciplines, gas dynamics is the one that allows joining them to the vacuum science for particle accelerators. The vacuum requirements (usually UHV or XHV) in particle accelerators are defined by beam–gas interactions that should be negligible compared to other phenomena that limit the quality of the beam. At such low pressures the main source of gas in the vacuum chamber is a molecular desorption from materials used for the vacuum chamber and its components. The outgassing rates vary over a very wide range and depend on material, cleaning procedure, treatments, temperature, bombardment by particles and accumulated irradiation dose. The gas dynamics is used to design the research facilities to accurately measure and to study outgassing rates at different conditions. By applying these data to the accelerator vacuum design, one would have to consider that outgassing is often non-uniform and changes with time with different functions. The most time-efficient way of beam vacuum optimization is using a 1D diffusion model where all parameters are defined as a function of longitudinal coordinate (along the beam path). A full 3D modelling with TPMC codes provides much more accurate results, however, being time consuming work is not ideal for pumping and design optimization and is used for complex components and for finalized design.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Dynamics and Kinetic Theory · Vacuum and Plasma Arcs · Plasma Diagnostics and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (90)

Show source-provided references
1. 2002
2. Wille · 2000
3. 2004
4. ILC-Report-2007-001; 2007. Available from: http://www.linearcollider.org/about/Publications/Reference-Design-Report.
5. SuperB Collaboration: Biagini M, Raimondi P, Seeman J. SuperB progress reports – accelerator. Available from: http://arxiv.org/abs/1009.6178v2.
6. Green Paper · 2009
7. http://www.isis.stfc.ac.uk/.
8. 2003
9. http://www.synchrotron-soleil.fr/.
10. http://clic-study.org/.
11. Dobbing GS. A study of the effects of insertion device parameters on gas scattering lifetime for DIAMOND, DPG-98-67.
12. http://ab-abp-rlc-ecloud.web.cern.ch/ab-abp-rlc-ecloud/.
13. A theory of the beam loss-induced vacuum instability applied to the heavy-ion synchrotron SIS1810.1016/S0168-9002(03)01811-4 ↗
14. ‘Stable to unstable’ transition in the (Cs, O) activation layer on GaAs (100) surfaces with negative electron affinity in extremely high vacuum10.1016/0169-4332(96)00106-7 ↗
15. Gallium Arsenide preparation and QE lifetime studies using the ALICE photocathode preparation facility
16. Bremsstrahlung measurements at the ESRF
17. Reduction of stainless-steel outgassing in ultra-high vacuum10.1088/0508-3443/18/10/313 ↗
18. Chuste G, CERN, unpublished results.
19. Development of extremely high vacuums with mirror-polished Al-alloy chambers10.1016/0042-207X(93)90063-G ↗
20. Ultimate pressure limitations10.1116/1.1492650 ↗
21. Air bake-out to reduce hydrogen outgassing from stainless steel10.1116/1.580967 ↗
22. Hydrogen content and outgassing of air-baked and vacuum-fired stainless steel10.1016/S0042-207X(97)00042-0 ↗
23. Hydrogen content and outgassing of air-baked and vacuum-fired stainless steel10.1016/0042-207X(92)90180-5 ↗
24. Reducing SS 304/316 hydrogen outgassing to 2×10−15 torrl/cm2s10.1116/1.2734151 ↗
25. Water vapor in vacuum systems10.1016/0042-207X(95)00246-4 ↗
26. Extreme high vacuum technology for particle accelerators
27. Comparison of Ti–Zr–V nonevaporable getter films deposited using alloy or twisted wire sputter-targets10.1116/1.3504600 ↗
28. Glazkov · 1985
29. Synchroreon radiation induced neutral gas desorption from samples of vacuum chamber10.1016/0042-207X(88)90495-2 ↗
30. Maslennikov IL, Turner WC, Anashin VV, Malyshev OB, Osipov VN, Nazmov V, et al. Photodesorption experiments on SSC Collider beam tube configuration. Proceedings of PAC-1993, Washington; 17–20 May 1993. p. 3876.10.1109/PAC.1993.309798 ↗
31. Reflection of photons and azimuthal distribution of photoelectrons in a cylindrical beam pipe10.1016/S0168-9002(99)00747-0 ↗
32. Photon-stimulated desorption yields from stainless steel and copper-plated beam tubes with various pretreatments10.1116/1.576638 ↗
33. Photodesorption from copper, beryllium and thin films10.1116/1.578028 ↗
34. Photon stimulated desorption of an unbaked stainless steel chamber by 3.75keV critical energy photons10.1116/1.581630 ↗
35. Gas desorption from an oxygen free high conductivity copper vacuum chamber by synchrotron radiation photons10.1116/1.579265 ↗
36. Photodesorption from a copper chamber with a broached inner surface10.1116/1.579790 ↗
37. Anashin V, Bulygin A, Kraemer D, Malyshev O, Mironenko L, Pyata E, et al. Photodesorption and power testing of the SR crotch-absorber for BESSY-II. Proc. of EPAC-98, Stokholm, vol. 3; 22–26 June 1998. p. 2163–5.
38. Hahn M, Kersevan R, Parat I. Status report on the performance of NEG-coated chambers at the ESRF. Proc. of EPAC'06, Edinburgh, Scotland; 23–26 June 2006. p. 1420.
39. The pressure and gas composition evolution during the operation of the LEP accelerator at 100GeV10.1016/S0042-207X(00)00383-3 ↗
40. Vacuum characteristics of an oxygen-free high-conductivity copper duct at the KEK Photon Factory ring10.1116/1.579030 ↗
41. Commissioning of the diamond light source storage ring vacuum system10.1088/1742-6596/100/9/092011 ↗
42. Synchrotron radiation induced gas desorption from a prototype Large Hadron Collider beam screen at cryogenic temperatures10.1116/1.579989 ↗
43. Investigation of synchrotron radiation-induced photodesorption in cryosorbing quasiclosed geometry10.1116/1.578965 ↗
44. Malyshev OB. The study of photodesorption processes in the prototypes of vacuum chambers for superconducting super colliders. Novosibirsk, Russia, PhD thesis; 1995 [in Russian].
45. Comparison of photodesorption yields using synchrotron radiation of low critical energies for stainless steel, copper, and electrodeposited copper surfaces10.1116/1.579042 ↗
46. Photon stimulated desorption from coper and aluminium chambers10.1116/1.2712187 ↗
47. Vacuum systems for the ILC helical undulator10.1116/1.2746876 ↗
48. Utilization of synchrotron radiation: current status and prospects10.1070/PU1977v020n07ABEH005444 ↗
49. Photodesorption and photoelectron yields at normal and grazing incidence10.1016/0042-207X(93)90089-S ↗
50. Malyshev · 1999
51. Collins · 2001
52. Simulation study of electron cloud induced instabilities and emittance growth for the CERN Large Hadron Collider proton beam10.1103/PhysRevSTAB.8.124402 ↗
53. Incoherent effects of electron clouds in proton storage rings10.1103/PhysRevLett.97.034801 ↗
54. Observation of vertical betatron sideband due to electron clouds in the KEKB low energy ring10.1103/PhysRevLett.94.054801 ↗
55. Electron cloud measurements and simulations for the Brookhaven relativistic heavy ion collider
56. Web site “Electron cloud in the LHC”. Available from: http://ab-abp-rlc.web.cern.ch/ab-abp-rlc-ecloud/.
57. Temperature dependence of the electron induced gas desorption yields on stainless steel, copper, and aluminium10.1116/1.580852 ↗
58. Billard · 2000
59. Electron stimulated desorption from bare and NEG coated stainless steel10.1116/1.3478672 ↗
60. Electron stimulated desorption from aluminium10.1016/j.vacuum.2011.01.028 ↗
61. Electron stimulated desorption from stainless steel at temperatures between −15 and +70°C10.1016/j.vacuum.2012.01.002 ↗
62. Design of the vacuum system for diamond, the UK 3rd generation light source10.1016/j.vacuum.2003.12.019 ↗
63. Malyshev OB, Cox MP. Design modelling and measured performance of the vacuum system of the Diamond Light Source storage ring. Vacuum. 10.1016/j.vacuum.2012.03.01510.1016/j.vacuum.2012.03.015 ↗
64. Bird · 1994
65. Saksaganskii · 1988
66. Introduction to Molflow+10.1116/1.3153280 ↗
67. Data on internal rarefied gas flows10.1063/1.556019 ↗
68. Monte Carlo simulation of gas flow through the KATRIN DPS2-F differential pumping system10.1016/j.vacuum.2005.11.044 ↗
69. Tritium gas flow dynamics through the source and transport system of the Karlsruhe tritium neutrino experiment10.1116/1.3039679 ↗
70. Malyshev OB. ILC DR vacuum design and e-cloud. Proc. of EPAC'08, Genoa, Italy; 23–27 June 2008. p. 673.
71. Collins · 2001
72. Ion induced gas desorption problems in the ISR10.1016/0042-207X(74)90001-3 ↗
73. Fischer · 1973
74. Gröbner · 1976
75. Mathewson · 1976
76. The effect of bakeout temperature on the electron and ion induced gas desorption coefficients of some technological materials10.1016/S0042-207X(79)80335-8 ↗
77. Hilleret N. Variation of the ion induced desorption yield with temperature and the nature of incident ions. Proc. of ICSS-4 & ECSS-3, Paris, France, vol. 2; September 1980. p. 1221.
78. Barnard · 1996
79. Ion induced desorption yield measurements for copper and aluminium10.1016/S0042-207X(02)00223-3 ↗
80. Ion desorption stability in superconduction high energy physics proton colliders10.1116/1.580078 ↗
81. Malyshev O. The ion impact energy on the LHC vacuum chamber walls. Proc. EPAC-2000, Vienna; 26–30 June 2000. p. 951.
82. Malyshev OB. Ion induced pressure instability in the ILC positron DR. Proc. of IPAC'10, Kyoto, Japan; 23–28 May 2010. p. 3566.
83. Malyshev · 1999
84. Malyshev OB, Rossi A. Ion desorption vacuum stability in the LHC: the multigas model. Proc. of EPAC-2000, Vienna, Austria; 2000. p. 948.
85. Mustafin · Nucl Instrm Meth A · 2003 · 510 · 19910.1016/S0168-9002(03)01811-4 ↗
86. Fischer W, Bai M, Brennan JM, Blaskiewicz M, Cameron P, Hseuh HC, et-al. Vacuum pressure rise with intense ion beams in RHIC. In: Garvey T, et al. (Eds.), Proc. of EPAC'02, Paris, France, 3–7 June 2002, JACoW, p. 1485.
87. Heavy-ion-induced electronic desorption of gas from metals10.1103/PhysRevLett.98.064801 ↗
88. Measurement and calculation of U+28 beam lifetime in SIS
89. Beam-loss induced pressure rise of Large Hadron Collider collimator materials irradiated with 158GeV/u In49+ ions at the CERN Super Proton Synchrotron10.1103/PhysRevSTAB.7.103202 ↗
90. Ar beam induced desorption from different materials at TSL10.1016/j.vacuum.2010.07.007 ↗