Effect of vacuum re-melting on the solid particles erosion behavior of Ni60-NiCrMoY composite coatings prepared by plasma spraying
Source abstract
Abstract
Abstract Ni60-NiCrMoY composite coatings prepared by supersonic atmospheric plasma spraying were subjected to vacuum re-melting. The effect of vacuum re-melting on erosion behavior of the as-sprayed coatings was examined at various impact angles. The erosion mechanism of the as-sprayed and re-melted coatings were also investigated. At low impact angles, metal removal of coatings and substrate was controlled by microcutting. The erosion resistance of the coatings was higher than that of substrate, and the re-melted coatings exhibited best erosion resistance. With increasing the impact angle, the erosion rate of substrate first increased and then decreased, while that of the coatings increased gradually. The highest erosion rate of substrate occurred at an impact angle of 45°, which was lower than that of the as-sprayed coatings and higher than that of the re-melted coatings. Vacuum re-melting broadened the range of the impact angles which the as-sprayed coating can bear. At high impact angles, the substrate showed serious ductile fracture. The as-sprayed coatings exhibited significant brittle fracture, and the lamellar spalling caused by crack initiation and propagation. The erosion of the re-melted coatings was carried out both by ductile and brittle fracture. Vacuum re-melting greatly improved the bonding strength and erosion resistance of the as-sprayed coatings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Erosion and Abrasive Machining · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. HVOF coating and surface treatment for enhancing droplet erosion resistance of steam turbine blades10.1016/S0043-1648(03)00253-9 ↗
2. A study on the corrosion and wearing of TRT blades
3. Structure and properties of WC-Co protective coating on 1Cr9MoVNbN Blade
4. Nano-mechanical characterization of plasma surface tungstenized layer by depth-sensing nano-indentation measurement10.1016/j.apsusc.2014.10.085 ↗
5. Investigation on microstructure and properties of Ni-based welded coatings
6. The influence of carbide dissolution on the erosion–corrosion properties of cast tungsten carbide/Ni-based PTAW overlays10.1016/j.wear.2011.01.046 ↗
7. Effect of carbide degradation in a Ni-based hardfacing under abrasive and combined impact/abrasive conditions10.1016/j.surfcoat.2011.07.064 ↗
8. Optimization and erosion wear response of NiCrSiB/WC–Co HVOF coating using Taguchi method10.1016/j.ceramint.2015.09.036 ↗
9. A study of the erosion–corrosion behavior of nano-Cr2O3 particles reinforced Ni-based composite alloying layer in aqueous slurry environment10.1016/j.vacuum.2010.10.009 ↗
10. Sliding wear behavior of gas tunnel type plasma sprayed Ni-based metallic glass composite coatings10.1016/j.vacuum.2012.02.010 ↗
11. Effects of phase constituents/microstructure of thermally grown oxide on the failure of EB-PVD thermal barrier coating with NiCoCrAlY bond coat10.1016/j.surfcoat.2005.08.140 ↗
12. The effect of post-treatment of a high-velocity oxy-fuel Ni-Cr-Mo-Si-B coating Part I: microstructure/corrosion behavior relationships10.1361/105996301770349240 ↗
13. Effect of Mo and CeO_2 on microstructure and properties of laser cladding nickel-base alloy coatings
14. Effect of niobium on the microstructure and wear resistance of nickel-based alloy coating by laser cladding
15. Study on microstructure and properties of new NiCrY alloy coating
16. Solid particle erosion of thermal sprayed coatings10.1016/j.wear.2004.03.021 ↗
17. The effect of volume fraction of WC particles on erosion resistance of WC reinforced iron matrix surface composites10.1016/S0043-1648(03)00290-4 ↗
18. The effects of additive elements on the sliding wear behavior of Fe-base hardfacing alloys10.1016/S0043-1648(03)00155-8 ↗
19. Effects of surface alloying on microstructure and wear behavior of ductile iron surface-modified with a nickel-based alloy using shielded metal arc welding10.1016/j.matdes.2010.10.006 ↗
20. Structure–property differences between supersonic and conventional atmospheric plasma sprayed zirconia thermal barrier coatings10.1016/j.surfcoat.2011.01.056 ↗
21. Contact fatigue failure evaluation of post-treated WC–NiCrBSi functionally graded thermal spray coatings10.1016/j.wear.2004.05.008 ↗
22. Acoustic emission monitoring of fatigue crack propagation10.1016/S0143-974X(02)00064-0 ↗
23. Wear behaviour of flame sprayed NiCrBSi coating remelted by flame or by laser10.1016/j.wear.2006.05.009 ↗
24. An investigation of the mechanical properties and wear resistance of NiCrBSi coatings carried out by in situ laser remelting10.1016/j.wear.2011.01.025 ↗
25. Effect of vacuum remelting on microstructure and wear resistance of NiCrMoY coatings deposited by supersonic atmospheric plasma spraying10.1016/j.surfcoat.2015.09.040 ↗
26. Influence of rare earth on wearability of spray welding layer
27. Development of research on erosion of materials
28. Investigation of impact of solid particles against hardmetal and cermet targets10.1016/S0301-679X(99)00073-0 ↗
29. The erosion of four materials using seven erodents — towards an understanding10.1016/S0043-1648(99)00176-3 ↗
30. Beijing, Microstructure characteristics and work-hardening mechanism of 316L austenitic stainless steel during cold deformation
31. Microstructural changes and strain hardening effects in abrasive contacts at different relative velocities and temperatures10.1016/j.matchar.2016.05.027 ↗