Solid-state interfacial reactions and compound morphology of cBN grain and surface Ti coating
Source abstract
Abstract
Abstract In order to research thoroughly the mechanism of the solid-state interfacial reactions and the induced compound morphology of cubic boron nitride (cBN) abrasive grains and the surface Ti-coating layer, annealing experiments of Ti-coated cBN grains were conducted at different temperatures of 550–950 °C for dwell times of 60 min under high-vacuum conditions. The corresponding interfacial characteristics were investigated by differential thermal analysis, X-ray diffraction and scanning electron microscopy. The results show that the relevant interfacial reactions and compound morphology between cBN and Ti are significantly influenced by the heat-treatment temperature. No reaction occurs below 550 °C, and TiN is the sole reaction product during heating from 650–750 °C. Three kinds of compounds, TiN, TiB2 and TiB, can exist in the interfacial region at 950 °C. Here, the favorable interfacial structures, cBN/TiB2/TiB/(TiB+TiN)/TiN/Ti, are developed for the excellent mechanical and chemical transition effects between cBN grains and Ti coating. The thermodynamic analysis finally predicts that there is a reasonable probability for the formation of such a special interfacial transition layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. Minimization of effect of cBN wheel wear on ground gear errors10.1016/S0890-6955(98)00048-0 ↗
2. Creep feed profile grinding of Ni-based superalloys with ultrafine polycrystalline cBN abrasive grits10.1016/S0141-6359(01)00078-2 ↗
3. Current trends in cBN grinding technology10.1016/S0007-8506(07)60188-7 ↗
4. Fabrication of monolayer-brazed diamond tools with optimum grain distribution10.4028/www.scientific.net/KEM.259-260.6 ↗
5. Interface between Ti-coated cBN and vitrified bond10.4028/www.scientific.net/KEM.259-260.14 ↗
6. Brazed cBN grinding tool with Ag-base filler alloy [J]10.4028/www.scientific.net/MSF.471-472.11 ↗
7. A new approach in the understanding of the SiC/Ti reaction zone composition and morphology10.1016/S1359-835X(98)00079-7 ↗
8. Experimental study of the reaction zone at boron nitride ceramic–Ti metal interface10.1016/S0921-5093(00)00837-6 ↗
9. Study on the phase diagram of the Ti–B–N system and the interfacial reaction of the Ti/BN joint10.1016/j.msea.2004.10.018 ↗
10. Liang · 1996
11. Behavior of Ti coating in cBN/Ti/vitrified bond gradient materials10.4028/www.scientific.net/MSF.423-425.539 ↗
12. Reaction between Ti-coated cBN and SiO2–Na2O–B2O3 glass bond
13. The interfacial stability of the coated-SiC/Fe couple10.1016/S0254-0584(01)00565-X ↗