article·2007-11-13

Thermal stability of CrCO–Ti compound coating

Zhiqiang Hu, G. H. Tan, Xin Zeng, Xing-zhao Ding

Publisher page

Abstract

Abstract A series of chromium-based coatings were fabricated by unbalanced magnetron sputtering technique. Their structures were characterized by X-ray diffraction (XRD), their adhesion by a scratch tester, their wear rate by a pin-on-disk wear tester, surface energy by surface contact angle goniometer, and their thermal stability by annealing at high temperatures under atmospheric argon gas. All as-deposited coatings are amorphous-like. The coatings' structures, contact angles, nano-hardness and wear rate changed after annealing at 400 °C. XRD revealed that amorphous-like CrCO–Ti (titanium doped CrCO) coatings consist of Cr 2 O 3 , Cr 7 C 3 and TiO phases while both Cr 2 O 3 and Cr 7 C 3 phases coexisted in amorphous-like CrCO coating. The preferential orientation of all amorphous-like Cr-based coatings changed upon the increase of the annealing temperature. These coatings have excellent wear resistance with wear rates as low as 10 − 8 mm 3 /Nm and low surface energy. It was found that both Ti doping and the introduction of a radio frequency power supply improved the coatings' ductility. The coating CrCO–Ti has a higher loading capacity compared to the undoped CrCO coating and was able to withstand a normal 8.9 N load in pin-on-disk wear test with a sliding velocity of 0.25 m/s and a distance of 4000 m.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.