Growing of YBaCo 4 O 7+δ thin films on α-Al 2 O 3 and SrTiO 3 substrates by means of the pulsed laser deposition technique
Source abstract
Abstract
Abstract Thin films of the layered cobaltate YBaCo 4 O 7 + δ were deposited by means of the pulsed laser deposition technique on c -axis oriented sapphire (α-Al 2 O 3 ) and (001)-oriented SrTiO 3 substrates. X-ray diffraction patterns of the YBaCo 4 O 7 + δ layers on sapphire substrates evidence a (001) and (101) oriented textured growth with a preferential out-of-plane orientation of the c -axis of the film. Since the lattice mismatch between film and substrate is fairly large, the observed texture is likely a consequence of the crystallographic anisotropy ( c / a ) of YBaCo 4 O 7 + δ . Films grown on SrTiO 3 substrates show a reduced crystalline quality compared to those films grown on α-Al 2 O 3 and are usually affected by impurity phases. This might be caused by the poor lattice matching between cubic SrTiO 3 and hexagonal YBaCo 4 O 7 + δ . The mosaic spread of the films, determined by the full width at half maximum of rocking curves, amounts to 2° and 3° for films grown on α-Al 2 O 3 and (001)-SrTiO 3 , respectively. The atomic composition of the films with respect to the cations was evaluated via Rutherford backscattering spectroscopy and found to be close to the nominal one. The results show that textured YBaCo 4 O 7 + δ films can be easily obtained on commercially available substrates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic and transport properties of perovskites and related materials · Advanced Condensed Matter Physics · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.