article·2003-12-05

The effect of silicon ion implantation on the structure of tantalum–silicon contacts

M. Peikert, Rajmohan Bhandari, E. Wieser, C. Wenzel, D. Lipp, H. Reuther, A. Mücklich

Publisher page

Abstract

Abstract The effect of ion beam mixing on the formation of tantalum–silicon contacts was studied. Silicon implantation into 50 nm Ta layers on n + -Si (1 0 0) was carried out at temperatures from 150 to 500 °C and fluences between 1×10 15 and 1×10 17 Si/cm 2 . The microstructural changes were characterized by Auger electron spectroscopy, X-ray diffraction and cross-sectional transmission electron microscopy. The contact resistance was measured before and after implantation using the four-point Kelvin method. Implantation at low temperature (∼150 °C) leads to the formation of an amorphous Ta(Si) interface-layer. The width of the mixed layer increases linearly with implanted dose and temperature. Substrate amorphization results in an increase of the contact resistance. An improved contact resistance was achieved by implantation with 5×10 16 Si/cm 2 at 400 °C. TaSi 2 formation at the interface was observed in this case.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Integrated Circuits and Semiconductor Failure Analysis · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.