article·2021-07-30

Slow speed friction behaviour of a-C:H with different fs-laser micro-patterns against diamond tip in hyaluronic acid

Annett Dorner-Reisel, Christian Schürer, Andy Engel, H. Albrecht, Stefan Svoboda, Steffen Weißmantel

Publisher page

Abstract

Abstract Slow speed and different normal forces were chosen for investigation of the friction under short impact sliding. The base material is a hydrogenated diamond-like carbon coating (a-C:H). The coating was modified by femtosecond laser micro-patterning (µ-patterning). Three different µ-patterns were generated in the hydrogenated diamond-like carbon (DLC) coating and compared with a-C:H in the “as-deposited” condition. The sliding behaviour was demonstrated without an intermediate medium and with fluid addition. In the latter case, hyaluronic acid gel (HYA) was added. Gentle or deep dimpling by local femtosecond laser ablation resulted in a significantly more variable coefficient of friction (COF) curvature. During dry sliding of the diamond tip against the laser µ-patterned a-C:H, a zig-zag shape of the COF curve was observed. For deep laser µ-patterned DLC under high normal force of 10 N, sudden switches to very low COF down to 0.02 occurred when HYA was added. For hydrogenated DLC with gentle laser µ-patterning, the lowest COF were observed in this study under hyaluronic gel lubrication and low normal forces of 1 N. A volume expansion of the DLC and negative coefficients of friction were observed after loading with 1 N for some coating variants. For laser-induced periodic surface structured (LIPSS) DLC, at low loads of 1 N the COF became higher while at high normal forces like 10 N, a positive trend of LIPSS on the friction behaviour were seen under hyaluronic gel addition. Laser µ-patterning effected graphitization of small or large regions of the a-C:H coating. The defect-rich graphite sections on laser µ-patterned DLCs influenced the crystallisation behaviour of HYA and its distribution.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Adhesion, Friction, and Surface Interactions · Lubricants and Their Additives

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.