journal article·2019-09Open access

Low temperature processing of solution-derived ceria deposits on flat surfaces of 3D-printed polyamide

S. Morales-Planas, A. Calleja, V.R. Vlad, J. Oró-Solé, J. Minguella-Canela, J. Farjas

Thin Solid Films· Volume 685

Abstract

Doped ceria deposits have been prepared on 3D-printed polyamide-12 components starting from inkjet-compatible solutions in an attempt to functionalize the surface of the plastic part, followed by a low temperature decomposition process at 160 °C in air. The non-continuous deposits were characterized by simultaneous thermogravimetric analysis, differential scanning calorimetry and evolved gas analysis, X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy with energy dispersive X-ray spectroscopy, transmission electron microscopy and electron diffraction. After thermal treatment, the deposits are still clearly visible at the surface of the polymer. However, no crystallinity of the ceria is observed, in contrast to identical low temperature processing on inert substrates such as glass where nanoparticle ceria aggregates were produced. This is tentatively explained by the chemically-reducing character of the polyamide, and in particular to CO and hydrocarbon gases released during the heating process, which would continuously induce the reduction of Ce4+ to Ce3+ at the low temperature of 160 °C, influencing the non-detection of crystalline ceria
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Catalytic Processes in Materials Science · Advanced Photocatalysis Techniques · Carbon dioxide utilization in catalysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Trovarelli · 2013
2. Fast response of resistive-type oxygen gas sensors based on nano-sized ceria powder10.1016/S0925-4005(03)00167-9 ↗
3. Dispersion and surface functionalization of oxide nanoparticles for transparent photocatalytic and UV-protecting coatings and sunscreens10.1088/1468-6996/14/2/023001 ↗
4. Highly ordered macroporous–mesoporous Ce0.4Zr0.6O2 as dual-functional material in a polysulfide polymer10.1007/s12274-017-1607-2 ↗
5. Characterization and corrosion studies of ceria thin film based on fluorinated AZ91D magnesium alloy10.1016/j.corsci.2008.05.016 ↗
6. Advances in chemical-mechanical planarization10.1557/mrs2002.244 ↗
7. A conceptual translation of homogeneous catalysis into heterogeneous catalysis: homogeneous-like heterogeneous gold nanoparticle catalyst induced by ceria supporter10.1039/c2nr33011c ↗
8. The microstructure of continuously processed YBa2Cu3Oy coated conductors with underlying CeO2 and ion-beam-assisted yttria-stabilized zirconia buffer layers10.1557/JMR.2000.0158 ↗
9. Physical, chemical and electrochemical properties of pure and doped ceria10.1016/S0167-2738(99)00318-5 ↗
10. Assessment of the potential economic impact of the use of AM technologies in the cost levels of manufacturing and stocking of spare part products10.3390/ma11081429 ↗
11. Multi Jet Fusion PA12 manufacturing parameters for watertightness, strength and Tolerances10.3390/ma11081472 ↗
12. Surfactant-assisted synthesis of CeO2 nanoparticles and their application in wastewater treatment10.1039/c2ra21590j ↗
13. Cerium dioxide as a new reactive sorbent for fast degradation of parathion methyl and some other organophosphates10.1016/S1002-0721(14)60079-X ↗
14. Printed electronics: the challenges involved in printing devices, interconnects, and contacts based on inorganic materials10.1039/c0jm00264j ↗
15. Synthesis of nanocrystalline ceria thin films by low-temperature thermal decomposition of Ce-propionate10.1016/j.tsf.2011.09.058 ↗
16. Thermal analysis for low temperature synthesis of oxide thin films from chemical solutions10.1021/jp4049742 ↗
17. Thermal analysis of metal organic precursors for functional oxide preparation: thin films versus powders10.1016/j.tca.2014.12.016 ↗
18. Mechanism of the degradation of polyamides10.1002/jctb.5010010704 ↗
19. Main products and kinetics of the thermal degradation of polyamides10.1016/S0045-6535(00)00233-2 ↗
20. A conducting composite of polypyrrole I. synthesis and characterization10.1016/0379-6779(94)90206-2 ↗
21. Thermal decomposition of yttrium propionate: film and powder10.1016/j.jaap.2018.03.021 ↗
22. Assignment for the infrared Spectrum of solid sodium propionate from low-temperature measurements in combination with 13C isotopic shifts10.1515/zna-1987-0509 ↗
23. Mechanical stability of sol-gel films10.1007/BF01184984 ↗
24. Cerium oxidation state in ceria nanoparticles studied with X-ray photoelectron spectroscopy and absorption near edge spectroscopy10.1016/j.susc.2004.05.138 ↗
25. Effect of casting conditions on polymorphism of nylon-12
26. Defect engineering in cubic cerium oxide nanostructures for catalytic oxidation10.1021/nl200722z ↗
27. Reduction reactivity of CeO2-ZrO2 oxide under high O2 partial pressure in two-step water splitting process10.1016/j.solener.2011.06.019 ↗
28. Studies on syntheses and properties of novel CeO2/polyimide nanocomposite films from Ce(Phen)3 complex10.1016/j.polymer.2007.03.077 ↗