Fabrication of Cu2ZnSnS4 thin films using a Cu-Zn-Sn-O amorphous precursor and supercritical fluid sulfurization
Source abstract
Abstract
Abstract A supercritical ethanol (scEtOH) environment, in which sulfur is highly soluble, can lead to safety improvements and cost reductions in the sulfurization process. In this study, the feasibility of the sulfurization process in scEtOH for the preparation of Cu2ZnSnS4 (CZTS) thin films at low temperature was verified with the purpose of creating a sustainable and cost-effective process for fabricating metal-sulfide solar cells. We found that to promote atomic diffusion of sulfur and achieve sulfurization at a low temperature, the presence of defects in the amorphous oxide thin film was preferable. Moreover, in thin film fabricated by sulfurization under ethanol, the crystal size was strongly affected by ethanol density. The grain size increased up to about 1 μm as the ethanol density increased, and grain growth was remarkable, particularly in the high-density conditions of over 3.0 mol/L. Finally, we fabricated a crystalline CZTS thin film, which exhibited structural and optical properties comparable to those of a film fabricated using conventional vapor-phase sulfurization. For the prepared disordered-kesterite CZTS thin film with a Cu-poor and Zn-rich composition, photoluminescence measurements confirmed that the donor or acceptor defects engage in the emission of about 1.24 eV at 5 K, and UV–Vis measurement revealed a bandgap of 1.38 eV at room temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.