article·2016-11-18

Effects of blocking oxide layer types on the performance of nonvolatile floating gate memory containing AgInSbTe-SiO 2 nanocomposite thin films

Kuo-Chang Chiang, Tsung-Eong Hsieh

Publisher page

Abstract

Abstract Influence of blocking oxide layer types on the performance of nonvolatile floating gate memory (NFGM) containing AgInSbTe (AIST)-SiO 2 nanocomposite as the charge-trapping layer was investigated. In the NFGM containing a 7-nm thick SiO 2 blocking oxide layer deposited by plasma-enhanced chemical vapor deposition (PECVD), a fairly large memory window (Δ V FB ) shift of 20.9 V with the charge density of 1.3 × 10 13 cm − 2 at ± 15 V gate voltage sweep was achieved. As to the NFGM containing HfO 2 blocking oxide layer, the device performance was inferior to that of PECVD-SiO 2 device due to the diffusion of HfO 2 into the nanocomposite layer. Interdiffusion resulted in the formation of HfSiO x phase and oxygen defects which might act as the leakage paths, consequently deteriorating the charge trapping efficiency of AIST nanocrystals (NCs) embedded in nanocomposite layer. Analytical results illustrated that the film quality and barrier height feature of blocking oxide layer are essential to form the deep trap sites in the programming layer to achieve a satisfactory NFGM performance with long-term reliability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Electronic and Structural Properties of Oxides · Advanced Memory and Neural Computing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.