The effect of Al2O3 passivation layer in pulsed-laser-deposited ZrO2 films on n-GaAs substrate as a function of post-annealing temperature
Source abstract
Abstract
Abstract We investigated the thermal stability of ZrO 2 /GaAs structures deposited by pulsed laser deposition as a function of the post-annealing temperature. During the annealing process the interfacial layer between the pulsed laser deposited ZrO 2 thin film and GaAs substrate increased significantly at the temperature of 500 °C, and the ZrO 2 thin film became fully crystallized to the monoclinic phase at the temperature of 600 °C. This resulted in the degradation of electrical properties such as the leakage current and the breakdown voltage, and an interfacial trap charge density. In order to improve the thermal stability, we pre-deposited an Al 2 O 3 passivation layer by atomic layer deposition followed by pulsed laser deposited ZrO 2 deposition. The amorphous Al 2 O 3 passivation layer hindered the crystallization of the ZrO 2 thin film during the annealing process, significantly improving the electrical characteristics of the resulting structure compared to the ZrO 2 /GaAs structures without an Al 2 O 3 passivation layer. In particular, the interfacial reaction was effectively suppressed up to a temperature of 600 °C so that the interface trap charge density was significantly decreased due to the low oxygen diffusivity of Al 2 O 3 layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and devices · Electronic and Structural Properties of Oxides · Ferroelectric and Negative Capacitance Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.