Au nanopatterns on glass substrate using block copolymer and their applications in transparent conducting electrode
Source abstract
Abstract
High density Au nanostructures were fabricated using polystyrene-block-polymethylmethacrylate (PS-b-PMMA) copolymer on glass substrate for the preparation of electrode materials with good stability, high transparency and excellent conductivity. A 1 wt.% polymer solution in toluene was spin coated on glass substrate. Samples were baked for 48 h at 200 degrees C with a continuous flow of Ar. Patterned polymer film was obtained by removing the PMMA region through exposing ultraviolet irradiation and rinsing in acetic acid. Au thin films with several thicknesses were then deposited onto the patterned glass substrates by thermal evaporation or sputtering. Removing PS cylinders by sonicating in acetone resulted in Au nanopattern on glass substrates. The connecting gold film acts as conductor while the holes allow light pass through it and helps to be transparent. The transmittance with Au film thickness of 7 nm and 4 nm was found to be about 63% and 70%, respectively. The resistivity was in the range 10(-5) Omega cm-10(-6) Omega cm which is comparable with ITO (10(-3) Omega cm-10(-4) Omega cm). (C) 2012 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Block Copolymer Self-Assembly · Advanced Polymer Synthesis and Characterization · Anodic Oxide Films and Nanostructures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.