article·2012-07-20

Influence of twice-deposited etching mask layers on verticality of nanostructures

Z.H. Liu, Cheng-Tang Pan, C. H. Chao, Z.Y. Ou, C.C. Li, C.Y. Liu

Publisher page

Abstract

Abstract The effects of single and double masks on focused ion beam (FIB) direct patterning and chlorine-based inductively coupled plasma reactive ion etching (ICP-RIE) were studied in order to determine the influence of twice-deposited mask layers on the verticality of the side wall of silicon-based nanostructures. When a single mask was used as the etching mask, an inclined plane with a large side angle on the top area was formed. When a double mask was used, the first mask layer of chromium (Cr) was deposited by RF (radio frequency) magnetron sputtering and then directly patterned by FIB. Then, the secondary mask layer of SiO 2 , which was deposited to protect the side wall in order to retard etching and prevent the formation of an inclined plane, was deposited by RF magnetron sputtering. However, the SiO 2 on the top and bottom of the nanostructure was removed through anisotropic etching by ICP-RIE, and only SiO 2 on the side wall was retained. The experimental results show that the SiO 2 layer left on the side wall as an etching barrier can effectively maintain the verticality of the nanostructure. The measurement results show that the verticality and aspect ratio of the nanostructure are 90.8° and 5.08 (depth: 310 nm, width: 61 nm), respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanowire Synthesis and Applications · Nanofabrication and Lithography Techniques · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.