Nanoscale diffusion in Pt/56Fe/57Fe thin-film system
Source abstract
Abstract
Abstract Low-temperature diffusion of Fe in Pt/56Fe/57Fe thin films (grown on MgO (100) substrate) was investigated between 703 K and 813 K using secondary neutral mass spectrometry. The activation energy of the effective interdiffusion coefficients, evaluated by the “centre-gradient” method, is 1.53 ± 0.25 eV reflecting a strong contribution from grain boundaries. This is also supported by the observed deep penetrations of Pt into the 56Fe layer, from which the grain boundary diffusion coefficients for Pt in Fe were also estimated and 1.45 ± 0.25 eV activation energy was obtained. A simple model, including the effect of grain boundaries to the overall intermixing at the original sharp interfaces in nanocrystalline films, is developed. This predicts that at short annealing times the grain boundary diffusion dominates, and bulk diffusion coefficients can be determined only in long time limit. At intermediate annealing times, when the grain boundaries are saturated but the bulk diffusion is still negligible, there are no changes in the composition profiles. This yields good qualitative agreement with the experimental data and offers explanation for the time and temperature dependence of the interdiffusion coefficients obtained in similar systems.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Advanced Materials Characterization Techniques · nanoparticles nucleation surface interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.