article·2015-01-21

Inkjet-printed silver film on multilayer liquid crystal polymer for fabricating a miniature stub-loaded bandpass filter

Hsuan‐Ling Kao, Cheng‐Lin Cho, Li-Chun Chang, Yung‐Hsien Wu

Publisher page

Abstract

Abstract In this study, the mechanical properties of silver film are studied using a nanoindentation test, dynamic bending test, and lamination bonding pressure test. The hardness and elastic modulus of silver film were approximately 1.08 and 88.5 GPa, respectively, which corresponds to those of bulk silver. Acceptable fatigue properties were obtained after 10 4 dynamic bending cycles. A lamination bonding pressure of 0.69 MPa and temperature of 270 °C were used to achieve multilayer liquid crystal polymer (LCP) technology. A miniature bandpass filter using inkjet printing technology on multilayer LCP was realized with a minimal S 21 value of − 1.4 dB at 25 GHz. The results demonstrated the proposed design methodology and fabrication technique.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Adhesion, Friction, and Surface Interactions · Synthesis and properties of polymers · Semiconductor Lasers and Optical Devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.