journal article·2020-01

Planarization of slot-die coated multilayer stripes via pre-drying by a heating roll for organic light-emitting diodes

Jinyoung Lee, Jongwoon Park

Thin Solid Films· Volume 693
Publisher page

Abstract

Abstract Micro-patterning of single-layer thin films in the cross-web (transverse) direction is feasible using a slot-die coating system. For its practical applications in organic light-emitting diodes (OLEDs), however, the fabrication and planarization of multilayer thin-film stripes are indispensable. We have coated multilayer stripes using an aqueous poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS) and non-aqueous poly(N-vinylcarbazole) (PVK) and planarized them via pre-drying by a heating roll in a roll-to-roll slot-die coating system. It is demonstrated that the PEDOT:PSS stripe can be planarized at a pre-drying (heating roll) temperature of 40 °C. At higher temperatures, it is found that there appear the evaporation-induced inward and/or outward capillary flows depending on the wet film thickness. Using a low-boiling-point solvent, the PVK stripe coated atop the planarized PEDOT:PSS stripe is shown to be planarized at a pre-drying temperature of 65 °C, the step coverage and thickness uniformity by which are substantially enhanced. Such a planarization scheme also brings in the positive effect on the surface morphology of those stripes. To verify the planarization effect at the device level, we have fabricated phosphorescent OLED stripes. Without planarization, the light-emitting area shrinks and a spot with strong light emission appears, increasing the probability of a short circuit in OLEDs. With planarization, however, we can achieve brighter light emission from OLED stripes with high inter-stripe emission uniformity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanomaterials and Printing Technologies · Nanofabrication and Lithography Techniques · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
2. Investigations on knife and slot die coating and processing of polymer nanoparticle films for hybrid polymer solar cells10.1016/j.cep.2010.11.002 ↗
3. Solution‐Coating technology for AMOLED displays
4. 43.3: slot die coating for OLED displays10.1889/1.3069746 ↗
5. Coating and drying processes for functional films in polymer solar cells-from laboratory to pilot scale
6. Choi · 2017
7. Low-flow limit in slot coating: theory and experiments10.1002/aic.690461003 ↗
8. Operating windows of slot die coating: comparison of theoretical predictions with experimental observations10.1002/adv.20173 ↗
9. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
10. Line printing solution-processable small molecules with uniform surface profile via ink-jet printer10.1016/j.jcis.2015.11.067 ↗
11. Inkjet printing—process and its applications10.1002/adma.200901141 ↗
12. Inkjet-printed line morphologies and temperature control of the coffee ring effect10.1021/la7026847 ↗
13. Effect of surface morphology of slot-die heads on roll-to-roll coatings of fine PEDOT: PSS stripes10.1016/j.orgel.2018.12.033 ↗
14. Shape changes during the drying of droplets of suspensions10.1021/la703484w ↗
15. Control of doctor-blade coated poly (3,4-ethylenedioxythiophene)/poly(styrenesulfonate) electrodes shape on prepatterned substrates via microflow control in a drying droplet10.1002/polb.22347 ↗
16. Controlling the drying and film formation processes of polymer solution droplets with addition of small amount of surfactants10.1021/jp9077757 ↗
17. Internal flow in polymer solution droplets deposited on a lyophobic surface during a receding process10.1021/la801176y ↗
18. OLED with a controlled molecular weight of the PVK (poly(9-vinylcarbazole)) formed by a reactive ink-jet process10.1016/j.orgel.2012.02.016 ↗
19. Effect of hole transporting materials in phosphorescent white polymer light-emitting diodes10.1016/j.orgel.2009.11.022 ↗
20. Highly conductive polymer anodes as replacements for inorganic materials in high-efficiency organic light-emitting diodes10.1002/adma.200602156 ↗
21. Efficient and flexible ITO-Free organic solar cells using highly conductive polymer anodes10.1002/adma.200800338 ↗
22. Capillary flow as the cause of ring stains from dried liquid drops10.1038/39827 ↗
23. Buoyancy and marangoni effects in an evaporating drop10.2514/2.6716 ↗
24. Experiments on adding a surfactant to water drops boiling on a hot surface10.1098/rspa.1997.0038 ↗
25. Step coverage study of indium-tin-oxide thin films by spray CVD on non-flat substrates at different temperatures10.1016/j.tsf.2007.10.040 ↗
26. Investigation on a short circuit of large-area OLED lighting panels10.1088/0268-1242/28/4/045013 ↗