Selective excitation of window and buffer layers in chalcopyrite devices and modules
Source abstract
Abstract
Abstract Window and buffer layers in chalcopyrite devices are well known to affect junctions, conduction, and photo-absorption properties of the device. Some of these layers, particularly “buffers,” which are deposited directly on top of the absorber, exhibit metastable effects upon exposure to light. Thus, to understand device performance and/or metastability, it is sometimes desirable to selectively excite different layers in the device stack. Absorption characteristics of various window and buffer layers used in chalcopyrite devices are measured. These characteristics are compared with emission spectra of common and available light sources that might be used to optically excite such layers. Effects of the window and buffer absorption on device quantum efficiency and metastability are discussed. For the case of bath-deposited Zn(O,S) buffers, we conclude that this layer is not optically excited in research devices or modules. This provides a complimentary mechanism to the chemical differences that may cause long time constants (compared to devices with CdS buffers) associated with reaching a stable “light-soaked” state.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Light-induced junction modification in (Cd, Zn) S/CuInSe 2 solar cells10.1109/T-ED.1984.21571 ↗
2. Roy · 1988 · Vol. 20 · 1681
3. Comparison of device performance and measured transport parameters in widely-varying Cu (In, Ga)(Se, S) solar cells10.1002/pip.654 ↗
4. Advanced electrical simulation of thin film solar cells10.1016/j.tsf.2012.10.032 ↗
5. Comprehensive simulation model for Cu (In, Ga)(Se, S)2 solar cells10.1016/j.solmat.2014.08.047 ↗
6. Highly efficient Cu (In, Ga) Se2 solar cells grown on flexible polymer films10.1038/nmat3122 ↗
7. Employing Si solar cell technology to increase efficiency of ultra-thin Cu (In, Ga) Se2 solar cells10.1002/pip.2527 ↗
8. Unveiling the effects of post-deposition treatment with different alkaline elements on the electronic properties of CIGS thin film solar cells10.1039/c4cp00614c ↗
9. Perspectives and opportunities in polycrystalline thin-film photovoltaic technologies
10. 2016
11. CIGS J–V distortion in the absence of blue photons10.1016/j.tsf.2004.11.099 ↗
12. Generation-dependent charge carrier transport in Cu (In, Ga) Se2/CdS/ZnO thin-film solar-cells10.1063/1.4788827 ↗
13. Characterization of metastabilities in Cu (In, Ga) Se2 thin-film solar cells by capacitance and current-voltage spectroscopy10.1063/1.3656453 ↗
14. Red-blue effect in Cu (In, Ga) Se 2-based devices revisited10.1016/j.tsf.2012.11.040 ↗
15. Highly efficient CIS solar cells and modules made by the co-evaporation process10.1016/j.tsf.2008.10.126 ↗
16. Investigation of the metastability behavior of CIGS based solar cells with ZnMgO–Zn (S, O, OH) window-buffer layers10.1016/j.tsf.2010.12.148 ↗
17. Behavior of photocarriers in the light-induced metastable state in the p-n heterojunction of a Cu (In, Ga) Se2 solar cell with CBD-ZnS buffer layer10.1021/acsami.6b05005 ↗
18. Characterization of 19.9%-efficient CIGS absorbers
19. Optimization of CBD CdS process in high-efficiency Cu (In, Ga) Se 2-based solar cells10.1016/S0040-6090(01)01538-3 ↗
20. 18% efficiency Cd-free Cu (In, Ga) Se2 thin-film solar cells fabricated using chemical bath deposition (CBD)-ZnS buffer layers10.1143/JJAP.41.L165 ↗
21. Burst · 2010
22. Pankove · 1975
23. Optical properties and electronic structure of amorphous germanium10.1002/pssb.19660150224 ↗
24. Band offset of high efficiency CBD-ZnS/CIGS thin film solar cells10.1016/S0040-6090(03)00265-7 ↗
25. New reaction kinetics for a high-rate chemical bath deposition of the Zn (S, O) buffer layer for Cu (In, Ga) Se2-based solar cells10.1002/pip.1244 ↗
26. Measurement of the optical constants of soda-lime glasses in dependence of iron content and modeling of iron-related power losses in crystalline Si solar cell modules10.1109/JPHOTOV.2015.2498043 ↗
27. Optical constants of UV transparent EVA and the impact on the PV module output power under realistic irradiation10.1016/j.egypro.2016.07.136 ↗
28. Classification of metastabilities in the electrical characteristics of ZnO/CdS/Cu (In, Ga) Se 2 solar cells10.1016/S0040-6090(00)01850-2 ↗
29. Ushio · 2017
30. Buffer layers and transparent conducting oxides for chalcopyrite Cu (In, Ga)(S, Se) 2 based thin film photovoltaics: present status and current developments10.1002/pip.955 ↗
31. Buffer layers in Cu (In, Ga) Se 2 solar cells and modules10.1016/j.tsf.2004.11.118 ↗
32. Improved photocurrent in Cu (In, Ga) Se 2 solar cells: from 20.8% to 21.7% efficiency with CdS buffer and 21.0% Cd-free10.1109/JPHOTOV.2015.2458039 ↗
33. Blue-photon modification of nonstandard diode barrier in CuInSe 2 solar cells10.1016/S0927-0248(98)00035-X ↗
34. Comparison of charge distributions in CIGS thin-film solar cells with ZnS/(Zn, Mg) O and CdS/i-ZnO buffers10.1016/j.tsf.2010.12.127 ↗