Stability in organic solar cells with Ag/pentacene anode buffer under repetitive illumination
Source abstract
Abstract
Abstract The degradation phenomenon in small-molecule organic solar cells (OSCs) with a structure of indium-tin oxide (ITO, anode)/anode buffer/copper phthalocyanine (CuPc, donor)/fullerene (acceptor)/bathocuproine (cathode buffer)/Ag (cathode) was experimentally investigated. Two kinds of anode buffer layers, a 2-nm-thick pentacene layer and a 0.5-nm-thick Ag layer, were examined. The devices were subjected to repetitive illumination stress through the transparent ITO electrode in air. The ultra-thin Ag layer enhanced the ability of the devices to withstand the illumination stress. A thinner Ag layer resulted in better device performance. Resonant light absorption in the nanometer-scale Ag clusters probably accumulates trapped electrons near the ITO/CuPc interface, shrinks the depletion layer, enhances tunneling injection of holes, and suppresses the S-shaped kink during the illumination. The thin pentacene layer provides good ohmic contact between the anode and the CuPc layer, resulting in a larger short-circuit current. OSCs fabricated with both Ag and pentacene anode buffer layers exhibited only a 10% decrease in power conversion efficiency at 60 repetitions, whereas OSCs without an anode buffer layer exhibited a decrease of approximately 45%. The large decrease in efficiency was dominated by the decrease in the fill factor.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.