Thermochemical and thermionic properties of ionic crystalline films
Source abstract
Abstract
Abstract To clarify the thermochemical and thermionic properties of various layers of alkali halide (MX) such as LiF, LiI, NaBr, KCl, RbCl or CsCl, a thin film [ θ 0 ≃1−10 4 molecular layers (ML) at the start] of MX was prepared on a metal plate (∼0.04 cm2), and the absolute desorption rates (n+ and n0) of both positive ion (M+) and neutral molecule (MX0) were measured simultaneously in a vacuum as a function of sample temperature increased stepwise (by ∼5 K, approx. every 20 min) or constantly (∼0.3–80 K/s) by using our dual-ion source system. Theoretical analysis of the experimental data yields the following conclusions. (1) Below the melting point (Tm), more than 90% of MX are desorbed as MX0. (2) Its desorption energy (E0) increases up to the heat of sublimation as θ 0 increases, suggesting that the film prepared at θ 0 ⪡ 103 ML is partly amorphous rather than crystalline. (3) Ionic desorption, on the other hand, occurs mainly above Tm giving 1–3 peaks in a temperature-programmed desorption spectrum. (4) The desorption energy of M+ from MX is much larger than E0 and depends upon the species of X. (5) The film surface is very inhomogeneous in thermionic properties, and M+ is desorbed from those active sites having a high work function (e.g. 724 kJ/mol for LiCl). (6) The fractional surface area of the active sites over the film surface is as small as 10–2–10–5. (7) The ionization efficiency (∼n+/n0) is less than 10–2, usually increasing with a decrease in θ 0 .
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermal Expansion and Ionic Conductivity · Ammonia Synthesis and Nitrogen Reduction · Ionic liquids properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.