Metallization of ceramic vacuum chambers for SNS ring injection kicker magnets
Source abstract
Abstract
Ceramic chambers will be used in the pulsed kicker magnets for the injection of H{sup -} into the US Spallation Neutron Source (SNS) accumulator ring. There are two reasons for using ceramic chambers in kickers: (1) to avoid shielding of a fast-changing external magnetic field by metallic chamber walls; and (2) to reduce heating due to eddy currents. The inner surfaces of the ceramic chambers will be coated with a conductive layer, possibly titanium (Ti) or copper with a titanium nitride (TiN) overlayer, to reduce the beam coupling impedance and provide passage for beam image current. This paper describes the development of sputtering method for the 0.83m long 16cm inner diameter ceramic chambers. Coatings of Ti, Cu and TiN with thicknesses up to 10 {micro}m were produced by means of DC magnetron sputtering. The difficulty of coating insulators was overcome with the introduction of an anode screen. Films with good adhesion, uniform longitudinal thickness, and conductivity were produced.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Particle accelerators and beam dynamics · Particle Accelerators and Free-Electron Lasers · Superconducting Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.