article·2004-11-03

The effect of Au thickness and annealing conditions on SiO2 formation in the Au/Si system

B.A. Julies, Daniel Adams, J. W. Mayer

Publisher page

Abstract

In this study, an investigation into low temperature silicon-dioxide formation in the Au/Si binary system was made. Rutherford Backscattering Spectrometry (RBS) and Cross-sectional Transmission Electron Microscopy (XTEM) were mainly employed in the characterization of the layers and their interfaces. Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS) were used for surface studies. Upon annealing of a Au/Si(100) structure at about 300 °C in an oxygen ambient, RBS clearly suggests the formation of a surface oxide layer on top of the gold overcoating layer to form a SiO2/Au/Si(100) structure. XTEM furthermore reveals that when the Au layer is about 50 nm thick, the Au layer breaks up during the annealing process as a result of some grains growing at the expense of others, to the extent that they become detached from one another. This phenomenon is less prevalent at lower annealing temperatures as well as for structures with thicker Au layers. Optimum annealing conditions and Au thicknesses are presented in order to obtain the best results in terms of surface SiO2 thicknesses.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and interfaces · Semiconductor materials and devices · Surface and Thin Film Phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.