Modified polycrystalline silicon chemical-vapor deposition process for improving roughness at oxide/polycrystalline silicon interface
Source abstract
Abstract
A new modified low pressure chemical-vapor deposition process for stacked polysilicon (poly-Si) films is developed in this study. The proposed stacked film process combines polysilicon with amorphous silicon films. In this process, polysilicon film was deposited first at 630 8C, followed by a continuous temperature decrease down to 560 8C for the deposition of amorphous silicon film. It was found that the doped stacked polysilicon films deposited by this process result in lowering of surface roughness, together with reduction of the (311) phase of the doped amorphous silicon and (110) phase of the doped polysilicon. As a consequence, device performance based on the stacked films also improves. Results of surface roughness analysis indicated that the doped stacked polysilicon film has a root-mean square surface roughness (Rrms) of 78 2, which is smaller than those of doped conventional (630 8C) polysilicon film (Rrms=97 2), and doped amorphous silicon film (Rrms=123 2, deposited at 560 8C). Transmission electron microscopic (TEM) observation performed at oxide/polysilicon interface showed that the conventional (630 8C) oxide/polysilicon interface has high angle grain boundaries on the polysilicon side, which may induce leakage current around the interfacial area. D 2004 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and devices · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.