journal article·2017-01

Method for Al thin film surface nanostructuring using Al imprinting and anodic oxidation: Application to a high capacitance density metal-insulator-metal capacitor

Emmanouel Hourdakis, Androula G. Nassiopoulou

Thin Solid Films· Volume 621
Publisher page

Abstract

Abstract A method for Al thin film surface nanostructuring using Al imprinting with a silicon insert and subsequent anodic oxidation and selective oxide removal for nanostructure thinning and surface smoothing is presented. Al imprinting results in direct pattern transfer of the Si insert pattern, while anodic oxidation results in an increase of the nanostructure pattern aspect ratio due to the observed anodic oxidation anisotropy between the vertical direction and sidewalls. Al lines of 120 nm width and height-to-width ratio of 6 were thus achieved, starting from a Si insert of 500 nm wide lines with a height-to-width ratio of 1, resulting in an effective surface area increase × 2.4, confirmed by a corresponding capacitance density increase of a MIM capacitor using the nanostructured Al thin film as the bottom electrode. The developed method is simple, fast, versatile, and does not require any expensive equipment for its realization. It can be used for the formation of a variety of different nanostructures on the Al surface, for use in a large variety of applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Anodic Oxide Films and Nanostructures · Semiconductor materials and devices · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Fabrication of metallic heat exchangers using sacrificial polymer mandrills10.1109/84.911098 ↗
2. Fabrication, assembly, and testing of Cu- and Al-based microchannel heat exchangers10.1109/JMEMS.2008.924276 ↗
3. Innovative high-performance nanowire-grid polarizers and integrated isolators10.1109/JSTQE.2004.841460 ↗
4. Direct Al-imprinting method for increased effective electrode area in MIM capacitors10.1109/TED.2015.2503803 ↗
5. High-performance MIM capacitors with nanomodulated electrode surface10.1109/TED.2015.2411771 ↗
6. Inkjet printing for site-controlled tunnel pitting with high aspect ratio in Al10.1149/1.3294519 ↗
7. Fabrication of ordered trench structures with high aspect ratios by anisotropic anode etching of Al(100)10.1149/1.3388511 ↗
8. Control of pitting sites on Al for electrolytic capacitors using patterned masking film10.1149/1.2214364 ↗
9. Direct microscale imprinting of Al at room temperature with Si inserts10.1007/s00542-008-0567-6 ↗
10. Fabrication of metal-based high-aspect-ratio microscale structures by compression molding10.1116/1.2912078 ↗
11. Three dimensional micromachining on aluminum surface by electrochemical wet stamping technique10.1016/j.elecom.2013.04.031 ↗
12. Direct nano-printing on Al substrate using a SiC mold10.1116/1.590024 ↗
13. Fabrication of subwavelength metallic structures by using a metal direct imprinting process10.1088/0022-3727/40/11/027 ↗
14. Grain size effect on nanopattern formability in direct imprint10.1143/JJAP.47.5185 ↗
15. Wafer-scale near-perfect ordered porous alumina on substrates by step and flash imprint lithography10.1021/nn1001744 ↗
16. Fabrication of ordered nanoporous anodic alumina prepatterned by mold-assisted chemical etching10.1186/1556-276X-6-157 ↗
17. Square and triangular nanohole array architectures in anodic alumina10.1002/1521-4095(200102)13:3<189::AID-ADMA189>3.0.CO;2-Z ↗
18. Highly ordered nanochannel-array architecture in anodic alumina10.1063/1.120128 ↗
19. Highly ordered diamond and hybrid triangle-diamond patterns in porous anodic alumina thin films10.1063/1.2957991 ↗
20. Fabrication of highly ordered Ta2O5 and Ta3N5 nanorod arrays by nanoimprinting and through-mask anodization10.1088/0957-4484/25/1/014013 ↗
21. Smyrnakis
22. Porous anodic aluminum oxide: anodization and templated synthesis of functional nanostructures10.1021/cr500002z ↗
23. Ultra-thin porous anodic alumina films with self-ordered cylindrical vertical pores on a p-type silicon substrate10.1088/0957-4484/16/1/021 ↗
24. Highly ordered hexagonally arranged nanostructures on silicon through a self-assembled silicon-integrated porous anodic alumina masking layer10.1088/0957-4484/19/49/495306 ↗
25. Abnormal anodic aluminum oxide formation in confined structures for lateral pore arrays10.1149/1.3532778 ↗
26. The formation of porous anodic aluminum oxide confined in μm-size contact and trench patterns10.1149/1.2360018 ↗
27. Formation of thick porous anodic alumina films and nanowire arrays on silicon wafers and glass10.1002/adfm.200304394 ↗