Si doped SiO2 glass light emitter within an optical cavity fabricated by ion beam sputter-deposition
Source abstract
Abstract
Abstract A light emitting Si-doped glass (Si-DG) film was fabricated using the ion beam sputter-deposition (IBSD) technique. Although the photoluminescence (PL) intensity increased with increasing annealing temperature up to approximately 900°C, it often decreased above the critical temperature. According to high-resolution transmission electron microscope (TEM) observations, Si crystallites with a diameter of approximately 3 nm were found in the film after the heat treatment, indicating that the formation of Si crystallites is closely related to the luminescence intensity. The luminescent Si-DG film showed extremely broad PL spectra, the full width at half-maximum (FWHM) typically being approximately 1 eV. To obtain a much sharper bandwidth for light emission, the Si-DG film was sandwiched by a metal (Ag) film and a dielectric multilayered reflector. The FWHM value of the PL spectrum was reduced to approximately 0.1 eV after fabricating the resonator using a 20-paired CeO 2 /Si-DG multilayered reflector.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon Nanostructures and Photoluminescence · Semiconductor materials and devices · Ga2O3 and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.