Growth responses of ultrathin CNx overcoats to process parameters
Source abstract
Abstract
Ultrathin CN x overcoats were grown using pulsed dc magnetron sputtering. Substrates were mounted on a holder that allowed 45° tilt angle and rotation. Effects of process parameters on film growth were reviewed. AFM scans over large sampling areas show that thin CN x films obtained at -100 V substrate bias with 45° substrate tilt and 20-25 rpm rotation have r.m.s. roughness about 0.2-0.3 nm when sampled over 20 × 20 μm 2 areas, increasing to ∼0.45 nm when sampled over ∼0.05 × 3 cm 2 using X-ray reflectivity measurements. These 1-2 nm thick ultrasmooth coatings reduced corrosion damage compared with coatings of the same thickness grown without substrate tilt and rotation. This improved performance is likely a result of more efficient and uniform momentum transfer parallel to the surface during deposition in this configuration. In addition, detailed X-ray reflectivity measurements showed that the mass density of these CN x films is ∼2.0 g/cm 3 , independent of film thickness from ∼1 to 10 nm, consistent with ion beam analysis.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Semiconductor materials and devices · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.