Structure and properties of Ti–Si–N films with ∼10 at.% Si deposited using reactive magnetron sputtering with high-flux low-energy ion assistance
Source abstract
Abstract
Abstract Ti–Si–N films with about 10 at.% Si were deposited onto silicon (100) substrates using inductively coupled plasma-assisted dc magnetron sputtering of Ti 80 Si 20 target in a mixture of argon and nitrogen. X-ray diffraction, transmission electron microscopy, scanning electron microscopy, X-ray photoelectron spectroscopy and nanoindentation analysis were employed to investigate the effects of ion flux and ion energy on the structure and hardness of as-deposited films. It was found that (i) high-flux ion irradiation with energy of 20 eV caused microstructure to change from non-assisted amorphous columnar form to one where there are globular nanocrystallites of TiN (nc-TiN) embedded in amorphous Si 3 N 4 (a-Si 3 N 4 ) network; (ii) the hardness of this nc-TiN/a-Si 3 N 4 nanocomposite film was approximately 35 GPa, significantly higher than that of monolithic TiN film of approximately 20 GPa; (iii) upon increasing ion energy the structure of Ti–Si–N film became columnar again and the hardness of film decreased markedly.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Ion-surface interactions and analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.