Demonstration of the Stierwalt effect caused by scatter from induced coating defects in multilayer dielectric filters
Source abstract
Abstract
Many applications of optical technology require the use of narrow bandpass filters with superior levels of out-of-band rejection. Frequently, system designs require that the filter be placed in close proximity to a detector or focal plane array. Many years ago Stierwalt (Opt. Eng. 13 (1974) G115; Proc. SPIE 132 (1978) 134) discovered that some filters that met out-of-band rejection specifications in a spectrophotometer did not meet specification when integrated into a focal plane assembly. In fact, he reported that proximal to the detector, one filter passed three orders of magnitude more out-of-band light. Since then, the Stierwalt effect has become widely discussed, but few papers have been published regarding this effect. Many investigators assume that the effect originates with scatter in the films, but very little data have been reported. In this paper, we demonstrate that optical coatings with high levels of scatter resulting from introduction of model coating defects exhibit an enhanced Stierwalt effect as compared to otherwise identical coatings that do not contain these defects. The seeding was done by depositing sparse 1 μm polystyrene spheres upon a clean substrate before sputter depositing a simple band-stop filter. Light rejection from filters prepared in this way showed a strong dependence upon the distance between the film and the detector. Filters deposited without the spheres showed a much smaller effect.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Roughness and Optical Measurements · Advanced Fiber Optic Sensors · Optical Coatings and Gratings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.