The etching characteristics of Al2O3 thin films in an inductively coupled plasma
Source abstract
Abstract
Abstract In this study, the etching characteristics of ALD deposited Al 2 O 3 thin film in a BCl 3 /N 2 plasma were investigated. The experiments were performed by comparing the etch rates and the selectivity of Al 2 O 3 over SiO 2 as functions of the input plasma parameters, such as the gas mixing ratio, the DC-bias voltage, the RF power, and the process pressure. The maximum etch rate was obtained at 155.8 nm/min under a 15 mTorr process pressure, 700 W of RF power, and a BCl 3 (6 sccm)/N 2 (14 sccm) plasma. The highest etch selectivity was 1.9. We used X-ray photoelectron spectroscopy (XPS) to investigate the chemical reactions on the etched surface. Auger electron spectroscopy (AES) was used for the elemental analysis of the etched surfaces.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and devices · Electronic and Structural Properties of Oxides · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.