article·2009-03-26

Alternate monatomic layer deposited L10 FePt (001) with high coercivity and small grain size

Y.H. Fang, P. C. Kuo, S.C. Chen, Shen‐Mou Hsu, G.P. Lin

Publisher page

Abstract

Abstract The different thickness (5–40 nm) FePt films with Fe and Pt monatomic layer were alternate deposited on a Corning 7059 glass substrate without under-layer, and annealed these films at different temperatures (500–700 °C). X-ray diffraction analysis of the 10 nm FePt sample which annealed at 700 °C for 30 min, the (001) and (002) diffraction peaks are stronger than those annealed at 600 °C for 30 and 60 min. And the out-of-plane coercivity (Hc⊥) and out-of-plane squareness (S⊥) value of this film are about 20 kOe and 1, respectively. Field emission gun high resolution transmission electron microscopy (FEG-TEM) analysis of 10 nm FePt annealed at 700 °C for 30 min, show that that the distribution of FePt grains is very uniform and the grain sizes are smaller than 12 nm.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnetic properties of thin films · Metallurgical and Alloy Processes · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.